Input Voltage Range: Input Under Voltage Shutdown Input Filtering: Efficiency: No Load Input Current: 9-18, 36-75 VDC 33V (36-75) VDC Pi filter See Available Models Chart 25mA typical
Output Voltage Accuracy: Output Voltage Adjustment: Total Error Band: Minimum Load Requirements: Line Regulation: Load Regulation: Ripple and Noise: Transient Response/Recovery Time: Temperature Coefficient: Short Circuit Protection: Over Voltage Protection: +/-1% V1 Fixed, V2 adjustable +10% and -30% of nominal +/-2% Max. None +/-0.5% Low Line - High Line +/-0.5% Min Load - Full Load or 1% pk-pk, 20MHz Bandwidth 200uS Typ., 25% Load Step / �C Continuous (Hiccup Mode) Standard
Dual, independantly controlled output channels Unencapsulated construction Industry Standard 2.0" x.40" Footprint Switching frequencies synchronized at 400kHz
Operating Temperature Range (Ambient): Storage Temperature Range: Maximum Case Temperature: Thermal Shutdown: Humidity: Vibration Reliability (MTBF per to +85�C, See 2700HN Series Data Sheet for Derating curves. +125�C 105�C Baseplate 115�C Baseplate to 95%, Non-condensing 2KHz >800,000 hours, +25�C, Ground BenignMixed analog/digital subsystems Telecom equipment Distributed power networks
Switching Frequency: Isolation (Input to Output): Isolation Capacitance: Weight: Case Material: Agency Approvals 400KHz, Fixed 1500VDC minimum (1 minute) 1.2oz (34g) Aluminum baseplate with black anodized aluminum case UL, CSA, TUV and CE (LVD, 48 Vin Models)Pin Function Remote On/Off No Pin - Input + Input Trim V2 Output Common V1 Output
VENT SLOTS ARE TYPE FOR TWO LONG SIDES ONLY.
All specifications are typical at 25 degrees C with nominal input voltage and full output unless otherwise noted. Specifications are subject to change without notice. All dimensions are typical.