The CD4015BC contains two identical, 4-stage, serialinput/parallel-output registers with independent "Data", "Clock," and "Reset" inputs. The logic level present at the input of each stage is transferred to the output of that stage at each positive-going clock transition. A logic high on the "Reset" input resets all four stages covered by that input. All inputs are protected from static discharge by a series resistor and diode clamps to VDD and VSS.Features
s Wide supply voltage range: 18V s High noise immunity: 0.45 VDD (typ.) s Low power TTL: Fan out of 2 driving 74L compatibility: or 1 driving 74LS s Medium speed operation: 8 MHz (typ.) clock rate s Fully static design: @VDD - VSS = 10VApplications
Serial-input/parallel-output data queueing Serial to parallel data conversion General purpose register
Order Number CD4015BCM CD4015BCN Package Number M16A N16E Package Description 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code.X = Don't Care Case Note 1: Level Change
(Note 3) DC Supply Voltage (VDD) Input Voltage (VIN) Storage Temperature Range (TS) Power Dissipation (PD) Dual-In-Line Small Outline Lead Temperature (TL) (Soldering, 10 seconds) 500 mWDC Supply Voltage (VDD) Input Voltage (VIN) Operating Temperature Range (TA)
Note 2: "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed; they are not meant to imply that the devices should be operated at these limits. The tables of "Recommended Operating Conditions" and "Electrical Characteristics" provide conditions for actual device operation. Note 3: VSS = 0V unless otherwise specified.
Symbol IDD Parameter Quiescent Device Current VOL LOW Level Output Voltage VOH HIGH Level Output Voltage VIL LOW Level Input Voltage VIH HIGH Level Input Voltage IOL LOW Level Output Current (Note 4) IOH HIGH Level Output Current (Note 4) IIN Input Current Conditions VDD = 5V, VIN = VDD or VSS VDD = 10V, VIN = VDD or VSS VDD = 15V, VIN = VDD or VSS VDD = 5V VDD = 10V VDD = 15V VDD = 5V VDD = 10V VDD = 15V VDD or 4.5V VDD or 9.0V VDD or 13.5V VDD or 4.5V VDD or 9.0V VDD or 13.5V VDD = 0.4V VDD = 0.5V VDD = 1.5V VDD = 4.6V VDD = 9.5V VDD = 13.5V VDD = 15V, VIN = 0V VDD = 15V, VIN = 15V