UC2854BMDWREPG4 product image

UC2854BMDWREPG4

Power Factor Correction ICs
likes(0)bads(1)
Manufacturer
Texas Instruments
Description

 

The UC2854BMDWREPG4  products is pin compatible enhanced versions of the UC2854. Like the UC2854, these products provide all of the functions necessary for active power factor corrected preregulators. The controller achieves near unity power factor by shaping the ac-input line current waveform to correspond to the ac-input line voltage. To do this the UC2854BMDWREPG4 uses average current mode control. Average current mode control maintains stable, low distortion sinusoidal line current without the need for slope compensation, unlike peak current mode control. A 1% 7.5-V reference, fixed frequency oscillator, PWM, voltage amplifier with soft-start, line voltage feedforward (VRMS squarer), input supply voltage clamp, and over current comparator round out the list of features. The UC2854B is available in a DW (SOIC-Wide) package. The UC2854A/B products improve upon the UC2854 by offering a wide bandwidth, low offset current amplifier, a faster responding and improved accuracy enable comparator, a VREF GOOD comparator, UVLO threshold options (16 V/10 V for offline, 10.5 V/10 V for startup from an auxiliary 12-V regulator), lower startup supply current, and an enhanced multiply/divide circuit. New features like the amplifier output clamps, improved amplifier current sinking capability, and low offset VAC pin reduce the external component count while improving performance. Improved common mode input range of the multiplier output/current amplifier input allow the designer greater flexibility in choosing a method for current sensing. Unlike its predecessor, RSET controls only oscillator charging current and has no effect on clamping the maximum multiplier output current. This current is now clamped to a maximum of 2 × IAC at all times which simplifies the design process and provides foldback power limiting during brownout and extreme low line conditions.

 

UC2854BMDWREPG4 Features


•Controlled Baseline -One Assembly/Test Site, One Fabrication Site
•Extended Temperature Performance of -55°C to 125°C
•Enhanced Diminishing Manufacturing Sources (DMS) Support
•Enhanced Product-Change Notification
•Qualification Pedigree†
•Controls Boost PWM to Near-Unity Power Factor
•Limits Line Current Distortion To < 3%
•World-Wide Operation Without Switches
•Accurate Power Limiting
•Fixed-Frequency Average Current-Mode Control
•High Bandwidth (5 MHz), Low-Offset Current Amplifier
•Integrated Current- and Voltage Amplifier Output Clamps
•Multiplier Improvements: Linearity, 500 mV VAC Offset (Eliminates External Resistor), 0 V to 5 V Multout Common-Mode Range
•VREF GOOD Comparator
•Faster and Improved Accuracy ENABLE Comparator
•UVLO Options (16 V/10 V or 10.5 V/10 V)
•300-μA Start-Up Supply Current

Parametrics
Switching Frequency:115 kHz
Maximum Operating Temperature:+ 125 C
Package / Case:SOIC-16
Minimum Operating Temperature:- 55 C
UC2854BMDWREPG4 Price
Reference price:
UC2854BMDWREPG4
Quote within 24 hours
Request for Quotation
Part No.:
UC2854BMDWREPG4
*Quantity :
*Name :
*Email :
Phone/MP :
 
TDA2050VAudio AmplifiersInternational Rectifier
MDD312-14N1Diodes, Rectifiers - ModulesMaxim Integrated
IRLML6402TRPBFTransistorsavx
LMC6064INOperational Amplifiers - Op AmpsMOSPEC [Mospec Semiconductor]
LM7812ACTLinear Regulators - StandardAnalog Devices
12TL604Basic / Snap Action SwitchesInfineon Technologies AG
ML4800CPPower Factor Correction and PWM Controller ComboISC [Inchange Semiconductor Company Limited]
XP161A1355PRFETs - SingleSemicoa Semiconductor
SN74LS244NE4Buffers & Line DriversMCC [Micro Commercial Components]
DTA144EKATransistors (BJT) - Single, Pre-BiasedWEITRON [Weitron Technology]