W25Q32DWZPIG product image

W25Q32DWZPIG

Memory
likes(0)bads(1)
Manufacturer
WINBOND [Winbond]
Description
 
The W25Q32DW ( W25Q32DWZPIG ) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI(XIP) and storing voice, text and data. The device operates on a single 1.7V to 1.95V power supply with current consumption as low as 4mA active and 1µA for power-down. All devices are offered in spacesaving packages.The W25Q32DW array is organized into 16,384 programmable pages of 256-bytes each. Up to 256 bytes can be programmed at a time. Pages can be erased in groups of 16 (4KB sector erase), groups of 128 (32KB block erase), groups of 256 (64KB block erase) or the entire chip (chip erase). The W25Q32DWhas 1,024 erasable sectors and 64 erasable blocks respectively. The small 4KB sectors allow for greater flexibility in applications that require data and parameter storage. (See figure 2.) The W25Q32DW support the standard Serial Peripheral Interface (SPI), Dual/Quad I/O SPI as well as 2-clocks instruction cycle Quad Peripheral Interface (QPI): Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 (/WP), and I/O3 (/HOLD). SPI clock frequencies of up to 104MHz are supported allowing equivalent clock rates of 208MHz (104MHz x 2) for Dual I/O and 416MHz (104MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O and QPI instructions. These transfer rates can outperform standard Asynchronous 8 and 16-bit Parallel Flash memories. The Continuous Read Mode allows for efficient memory access with as few as 8-clocks of instruction-overhead to read a 24-bit address, allowing true XIP (execute in place) operation.A Hold pin, Write Protect pin and programmable write protection, with top or bottom array control,provide further control flexibility. Additionally, the device supports JEDEC standard manufacturer and device identification, a 64-bit Unique Serial Number and four 256-bytes Security Registers.
 
W25Q32DWZPIG Features
 
• Highest Performance Serial Flash 
– 104MHz Standard/Dual/Quad SPI clocks
– 208/416MHz equivalent Dual/Quad SPI
– 50MB/s continuous data transfer rate
– More than 100,000 erase/program cycles
– More than 20-year data retention
• Efficient “Continuous Read” and QPI Mode
– Continuous Read with 8/16/32/64-Byte Wrap
– As few as 8 clocks to address memory
– Quad Peripheral Interface (QPI) reduces 
instruction overhead
– Allows true XIP (execute in place) operation
– Outperforms X16 Parallel Flash
 

 

Parametrics
Voltage - Supply1.7 V ~ 1.95 V
Operating Temperature-40°C ~ 85°C
W25Q32DWZPIG Price
Reference price:
W25Q32DWZPIG
Quote within 24 hours
Request for Quotation
Part No.:
W25Q32DWZPIG
*Quantity :
*Name :
*Email :
Phone/MP :
 
GRM216R71C333KA01DCeramic CapacitorsSTMICROELECTRONICS
24LC512T-I/STMemoryTexas Instruments(texas)
74AUP1G18GMLogic - Signal Switches, Multiplexers, DecodersSECOS [SeCoS Halbleitertechnologie GmbH]
LM124DROperational Amplifiers - Op AmpsUTC [Unisonic Technologies]
OPA549TOperational Amplifiers - Op AmpsNXP Semiconductors
SN74HC139PWREncoders, Decoders, Multiplexers & Demultiplexers
MC33290DInterface - SpecializedInternational Rectifier
PCF8563TSReal Time ClockComchip Technology
TL431ACZTVoltage & Current ReferencesSeiko Instruments
TPS65051RSMTPMIC Solutions