The a 2-input OR/NOR Gate and a single Inverter Gate in an eight pin SOIC package. All inputs have 50 k pull-down resistors and all outputs are buffered. The 100201 is ideal for single gate needs or for use as the feedback loop of a crystal oscillator circuit.Features
s Small 8 lead 150 mil SOIC package s 2000V ESD protection s 300 MHz minimum F toggle s Temperature compensated s Voltage compensated operating range to -5.7V VEE
Order Number 100201SC Package Number M08A Package Description 8-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.50" Narrow
Device also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering code.Pin Names Da, D2b Ob Oa, Ob Description Data Inputs Data Outputs Complementary Data Outputs
Storage Temperature (TSTG) Maximum Junction Temperature (TJ) VEE Pin Potential to Ground Pin Input Voltage (DC) Output Current (DC Output HIGH) ESD (Note to +0.5V VEE mA 2000VOperating Temperature (TC) Supply Voltage (VEE) to -4.2V
Note 1: The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The "Recommended Operating Conditions" table will define the conditions for actual device operation. Note 2: ESD testing conforms to MIL-STD-883, Method 3015.
Symbol VOH VOL VOHC VOLC VIH VIL IIL IIH IEE Parameter Output HIGH Voltage Output LOW Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Voltage Input LOW Voltage Input LOW Current Input HIGH Current Power Supply Current Min
Typ -955 -1705 Max -870 -1620 Units �A mA Conditions VIN = VIH(Max) or VIL(Min) VIN = VIH(Min) or VIL(Max) Loading with to -2.0V Loading with to -2.0V
Guaranteed HIGH Signal for All Inputs Guaranteed LOW Signal for All Inputs VIN = VIL(Min) VIN = VIH(Max) Inputs OPEN
Note 3: The specified limits represent the "worst case" value for the parameter. Since these values normally occur at the temperature extremes, additional noise immunity and guardbanding can be achieved by decreasing the allowable system operating ranges. Conditions for testing shown in the tables are chosen to guarantee operation under "worst case" conditions.
VEE to -5.7V, VCC = GND Symbol tPLH tPHL tTLH tTHL Parameter Propagation Delay Data to Output Transition Time 20% �C Min 0.4 Max = +25�C Min 0.4 Max = +85�C Min 0.4 Max 1.20 Units ns Conditions Figure 1Figure 2 (Note 4) Figure 1Figure 2
Note 4: The propagation delay specified is for single output switching. Delays may vary 100 ps with multiple outputs switching.
Notes: VCC, VCCA = +2V, VEE -2.5V L1 and L2 = equal length 50 impedance lines = 50 terminator internal to scope Decoupling 0.1 �F from GND to VCC and VEE All unused outputs are loaded with 50 to GND CL = Fixture and stray capacitance 3 pF