The is a monolithic quad driver with two OR and two NOR outputs and common enable. The common input is buffered to minimize input loading. If the D inputs are not used the Enable can be used to drive sixteen 50 lines. All inputs have 50 k pull-down resistors and all outputs are buffered.Features
s 50% power reduction of the s 2000V ESD protection s Pin/function compatible with 100113 and 100112 s Voltage compensated operating range -5.7V s Available to industrial grade temperature range (PLCC package only)
Order Number 100313QC 100313QI Package Number N24E V28A Package Description 24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.400 Wide 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square Industrial Temperature Range to +85�C)
Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code.
Pin Names Da�Dd E Ona�Ond Description Data Inputs Enable Input Data Outputs Complementary Data OutputsH = HIGH Voltage Level L = LOW Voltage Level X = Don't Care
Storage Temperature (TSTG) Maximum Junction Temperature (TJ) VEE Pin Potential to Ground Pin Input Voltage (DC) Output Current (DC Output HIGH) ESD (Note 2)Case Temperature (TC) Commercial Industrial Supply Voltage (VEE) to +85�C
Note 1: The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The "Recommended Operating Conditions" table will define the conditions for actual device operation. Note 2: ESD testing conforms to MIL-STD-883, Method 3015.
VEE to -5.7V, VCC = VCCA = GND, to +85�C Symbol VOH VOL VOHC VOLC VIH VIL IIL IIH Parameter Output HIGH Voltage Output LOW Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Voltage Input LOW Voltage Input LOW Current Input HIGH Current Data Enable IEE Power Supply Current mA Inputs OPEN �A VIN = VIH (Max) -1830 0.50 Min Typ -955 -1705 Max -870 -1620 Units mV �A VIN =VIH (Max) or VIL (Min) VIN = VIH (Min) or VIL (Max) Guaranteed HIGH Signal for All Inputs Guaranteed LOW Signal for All Inputs VIN = VIL (Min) Conditions Loading with to -2.0V Loading with to -2.0V
Note 3: The specified limits represent the "worst case" value for the parameter. Since these values normally occur at the temperature extremes, additional noise immunity and guardbanding can be achieved by decreasing the allowable system operating ranges. Conditions for testing shown in the tables are chosen to guarantee operation under "worst case" conditions.
VEE to -5.7V, VCC = VCCA = GND Symbol tPLH tPHL tPLH tPHL tTLH tTHL Parameter Propagation Delay Data to Output Propagation Delay Enable to Output Transition Time = 0�C Min 0.80 0.45 Max = +25�C Min 0.80 0.45 Max = +85�C Min 0.80 0.45 Max 1.90 1.30 Units ns Conditions
Note 4: The propagation delay specified is for single output switching. Delays may vary 150 ps with multiple outputs switching.