Homedatasheet100322PC

100322PC Datasheet

Bipolar->ECL 100 Family
Share:
Manufacturer

Description

Features, Applications

The is a monolithic 9-bit buffer. The device contains nine non-inverting buffer gates with single input and output. All inputs have 50 k pull-down resistors and all outputs are buffered.

Features

s 30% power reduction of the s 2000V ESD protection s Pin/function compatible with 100122 s Voltage compensated operating range -5.7V s Available MIL-STD-883 s Available to industrial grade temperature range (PLCC package only)

Order Number 100322QC 100322QI Package Number N24E V28A Package Description 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.400 Wide 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square Industrial Temperature Range to +85�C)

Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code.

Pin Names O1, O9 Description Data Inputs Data Outputs

Storage Temperature (TSTG) Maximum Junction Temperature (TJ) VEE Pin Potential to Ground Pin Input Voltage (DC) Output Current (DC Output HIGH) ESD (Note 2)

Case Temperature (TC) Commercial Industrial Supply Voltage (VEE) to +85�C

Note 1: The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The "Recommended Operating Conditions" table will define the conditions for actual device operation. Note 2: ESD testing conforms to MIL-STD-883, Method 3015.

VEE to -5.7V, VCC = VCCA = GND, to +85�C Symbol VOH VOL VOHC VOLC VIH VIL IIL IIH IEE Parameter Output HIGH Voltage Output LOW Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Voltage Input LOW Voltage Input LOW Current Input HIGH Current Power Supply Current Min Typ -955 -1705 Max -870 -1620 Units �A mA VIN =VIH (Max) or VIL (Min) VIN = VIH(Min) or VIL (Max) Guaranteed HIGH Signal for All Inputs Guaranteed LOW Signal for All Inputs VIN = VIL (Min) VIN = VIH (Max) Inputs Open Conditions Loading with to -2.0V Loading with to -2.0V

Note 3: The specified limits represent the "worst case" value for the parameter. Since these values normally occur at the temperature extremes, additional noise immunity and guardbanding can be achieved by decreasing the allowable system operating ranges. Conditions for testing shown in the tables are chosen to guarantee operation under "worst case" conditions.

VEE to -5.7V, VCC = VCCA = GND Symbol tPLH tPHL tTLH tTHL Parameter Propagation Delay Data to Output Transition Time = 0�C Min 0.45 0.35 Max = +25�C Min 0.45 0.35 Max = +85�C Min 0.45 0.35 Max 1.20 ns Figures 1, 2 (Note 4) Figures 1, 2 Units Conditions

Note 4: The propagation delay specified is for single output switching. Delays may vary 200 ps with multiple outputs switching.

Commercial Version (Continued) PLCC AC Electrical Characteristics

VEE to -5.7V, VCC = VCCA = GND Symbol tPLH tPHL tTLH tTHL tOSHL Parameter Propagation Delay Data to Output Transition Time to 20% Maximum Skew Common Edge Output-to-Output Variation Data to Output Path tOSLH Maximum Skew Common Edge Output-to-Output Variation Data to Output Path tOST Maximum Skew Opposite Edge Output-to-Output Variation Data to Output Path tPS Maximum Skew Pin (Signal) Transition Variation Data to Output Path

Note 5: The propagation delay specified is for single output switching. Delays may vary 200 ps with multiple outputs switching. Note 6: Output-to-Output Skew is defined as the absolute value of the difference between the actual propagation delay for any outputs within the same packaged device. The specifications apply to any outputs switching in the same direction either HIGH to LOW (tOSHL), or LOW to HIGH (tOSLH), or in opposite directions both HL and LH (tOST Parameters tOST and tPS guaranteed by design.

Industrial Version PLCC DC Electrical Characteristics (Note 7)

VEE to -5.7V, VCC = VCCA = GND, to +85�C Symbol VOH VOL VOHC VOLC VIH VIL IIL IIH IEE Parameter Output HIGH Voltage Output LOW Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Voltage Input LOW Voltage Input LOW Current Input HIGH Current Power Supply Current = -40�C Min Max to +85�C Min Max -870 -1620 Units �A mA Conditions VIN =VIH (Max) or VIL (Min) VIN = VIH (Min) or VIL (Max) Guaranteed HIGH Signal for All Inputs Guaranteed LOW Signal for All Inputs VIN = VIL (Min) VIN = VIH (Max) Inputs Open Loading with to -2.0V Loading with to -2.0V

Note 7: The specified limits represent the "worst case" value for the parameter. Since these values normally occur at the temperature extremes, additional noise immunity and guardbanding can be achieved by decreasing the allowable system operating ranges. Conditions for testing shown in the tables are chosen to guarantee operation under "worst case" conditions.

VEE to -5.7V, VCC = VCCA = GND Symbol tPLH tPHL tTLH tTHL Parameter Propagation Delay Data to Output Transition Time = -40�C Min 0.45 0.30 Max = +25�C Min 0.45 0.35 Max = +85�C Min 0.45 0.35 Max 1.35 1.10 Units ns Conditions Figures 1, 2 (Note 8) Figures 1, 2

Note 8: The propagation delay specified is for single output switching. Delays may vary 200 ps with multiple outputs switching.


Features

Parameters

Download DataSheet PDF View and Download


Manufacturer information

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227