The is a dual parity checker/generator. Each half has nine inputs; the output is HIGH when an even number of inputs are HIGH. One of the nine inputs (Ia or Ib) has the shorter through-put delay and is therefore preferred as the expansion input for generating parity for 16 or more bits. The 100360 also has a Compare (C) output which allows the circuit to compare two 8-bit words. The C output is LOW when the two words match, bit for bit. All inputs have 50 k pull-down resistors.Features
s Lower power than s 2000V ESD protection s Pin/function compatible with 100160 s Voltage compensated operating range -5.7V s Min to Max propagation delay 35% tighter than 100160 s Available to industrial grade temperature range
Order Number 100360QC 100360QI Package Number N24E V28A Package Description 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.400 Wide 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square Industrial Temperature Range to +85�C)
Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code.Pin Names Ia, Ib, Ina, Inb Za, Zb C Description Data Inputs Parity Odd Outputs Compare Output
(Each Half) Sum of HIGH Inputs Even Odd Output Z HIGH LOW 28-Pin PLCC
Storage Temperature (TSTG) Maximum Junction Temperature (TJ) VEE Pin Potential to Ground Pin Input Voltage (DC) Output Current (DC Output HIGH) ESD (Note 2)Case Temperature (TC) Commercial Industrial Supply Voltage (VEE) to +85�C
Note 1: The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The "Recommended Operating Conditions" table will define the conditions for actual device operation. Note 2: ESD testing conforms to MIL-STD-883, Method 3015.
VEE to -5.7V, VCC = VCCA = GND, to +85�C Symbol VOH VOL VOHC VOLC VIH VIL IIL IIH Parameter Output HIGH Voltage Output LOW Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Voltage Input LOW Voltage Input LOW Current Input HIGH Current Ia, Ib Ina, Inb IEE Power Supply Current mA Inputs OPEN �A VIN = VIH (Max) -1830 0.50 Min Typ -955 -1705 Max -870 -1620 Units mV �A VIN = VIH (Max) or VIL (Min) VIN = VIH (Min) or VIL (Max) Guaranteed HIGH Signal for All Inputs Guaranteed LOW Signal for All Inputs VIN = VIL (Min) Conditions Loading with to -2.0V Loading with to -2.0V
Note 3: The specified limits represent the ''worst case" value for the parameter. Since these values normally occur at the temperature extremes, additional noise immunity and guardbanding can be achieved by decreasing the allowable system operating ranges. Conditions for testing shown in the tables are chosen to guarantee operation under "worst case" conditions.
VEE to -5.7V, VCC = VCCA = GND Symbol tPLH tPHL tPLH tPHL tPLH tPHL tTLH tTHL Parameter Propagation Delay Ina, Inb to Za, Zb Propagation Delay Ina, Inb to C Propagation Delay Ia, Ib to Za, Zb Transition Time = 0�C Min Max = +25�C Min Max = +85�C Min Max Units ns Conditions