q Very compact units q Easy tube insertion for rapid assembly of pneumatic circuits q Positive tube anchorage q All BSP taper threads pre-coated with non-PTFE based sealant q Straight adaptors feature internal hexagon for Allen key q Silicone free `O'-rings
Medium: Compressed air (For other media please consult Technical Department) Operating Pressure: Vacuum � 18 bar (Dependent upon operating specification of tubing) Vacuum: of Hg i.e. 98% Operating Temperature: to +200�C with Viton `O'-ring - add suffix V) Tube Sizes mm O/D Tubing Types: Nylon or 12, Polyurethane and other plasticised or unplasticised tubing which conforms to the tolerances specified BS 5409, Part 1, 1976, light and normal duty, DIN 73378, DIN 74234, NFE 49-100 Materials Nickel plated brass or glass filled nylon for body Nickel plated brass for collet Silicone free nitrile rubber 'O' ring (Viton optional) Plastic sealing washer (parallel threads) Non - PTFE thread sealant (taper threads)
Ordering Information To order, quote appropriate product number from the tables on the following pages.Pneufit's new product numbering system is designed to make identification and selection simple:
Thread Size/ Tube Size Tube Size/ Thread Size
Warning: The push-in tube fittings in this section must not be used in vehicle air braking systems. For push-in fittings suited to these applications please consult our Technical Service for details.
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
STEM TAILPIECE ADAPTOR stem to hose bore 10019 STRAIGHT CONNECTOR tube to tube 10020 STRAIGHT STEM CONNECTOR (metal) 10022 STRAIGHT STEM CONNECTOR (plastic) 11022 REDUCING/EXPANDING CONNECTOR stem to tube 10023 BULKHEAD CONNECTOR tube to tube 10029 MIXED BULKHEAD CONNECTOR pif/compression 10031Page 9.3.001.09 STRAIGHT STEM ADAPTOR NPTF taper 10415
Page 9.3.001.04 FEMALE STRAIGHT ADAPTOR female parallel BSP 10226
ELBOW CONNECTOR tube to tube 10040 STEM ELBOW CONNECTOR stem to tube 10043 BULKHEAD SWIVEL ELBOW CONNECTOR tube to tube 10049 ELBOW ADAPTOR BSP taper 10145 90� SWIVEL ELBOW ADAPTOR BSP taper 10147 90� SWIVEL ELBOW ADAPTOR BSP parallel 10247 EXTENDED SWIVEL ELBOW ADAPTOR BSP taper 10154Page 9.3.001.05 ELBOW BANJO ASSEMBLY non-Regulating BSP parallel 10A51
Page 9.3.001.06 ELBOW BANJO ASSEMBLY regulating-out BSP parallel 10K51
Page 9.3.001.06 ELBOW BANJO ASSEMBLY regulating-out BSP taper 10TA0
Tee Connectors, Adaptors and Banjos, `Y' Connectors and Adaptors, 4-way Connectors
TEE CONNECTOR tube 3 10060 TEE ADAPTOR BSP taper 10165 SWIVEL TEE ADAPTOR BSP taper 10167 SWIVEL TEE ADAPTOR BSP parallel 10267 TEE BANJO ASSEMBLY non-regulating parallel thread 10A71 FIXED SIDE TEE ADAPTOR SWIVEL TEE ADAPTOR BSP taper BSP taper 10175 10168
ELBOW BANJO BODY 10051 TEE BANJO BODY 10071 BANJO BOLT non-regulating single stacking BSP parallel 20A00 BANJO BOLT non-regulating double stacking BSP parallel 20B00 BANJO BOLT BANJO BOLT non-regulating triple stacking BSP parallel single stacking with top port BSP parallel 20*00 20C00 BANJO BOLT regulating single stacking BSP parallel 20*00
PRESSURE INDICATOR Panel mounted 10009 PRESSURE INDICATOR plug in 10010 SILENCER plug in 10011 PLUG (acetal) 11004 BANJO BOLT non-regulating with test point single stacking BSP parallel 20J00 MANIFOLD tube 8 100D6 MANIFOLD BSP Taper 101D6Pneufit Push-in Tube Fittings Assembly Details
* Dimensions here and in the individual tables refer to the collet being in the `IN' position. Dimensions here (minimum bore diameter) are common per tube size for all Connectors, Elbows and Tees unless otherwise stated.1. Ensure that the end of the tube is cut square and is free from burrs.
2. Push the tube through the collet into the fitting.
3. Push the tube firmly through the `O' ring until it bottoms on the tube stop then pull back.
4. To disconnect, push the tube into the fitting, hold down the collet and withdraw the tube.
O/D tube stem to male taper NPTF thread