|1500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS
* 1500 Watts Surge Capability 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1�A above 10V * High temperature soldering guaranteed: / 10 seconds /.375"(9.5mm) lead length, 5lbs.(2.3kg) tension1500 Watts Peak Power 5.0 Watts Steady State
* Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Axial leads, solderable per MIL-STD-202, method 208 guranteed * Polarity: Color band denotes cathode end * Mounting position: Any * Weight: 1.20 grams
Rating 25 C ambient temperature uniess otherwies specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Peak Power Dissipation TP=1ms(NOTE 1) Steady State Power Dissipation TL=75 C Lead Length.375"(9.5mm) (NOTE 2) Peak Forward Surge Current at 8.3ms Single Half Sine-Wave superimposed on rated load (JEDEC method) (NOTE 3) Operating and Storage Temperature Range
NOTES: 1. Non-repetitive current pulse per Fig. 3 and derated above TA=25 C per Fig. 2. Mounted on Copper Pad area X 20mm) per 3. 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum.
1. For Bidirectional use or CA Suffix for types 1.5KE6.8 thru 1.5KE440. 2. Electrical characteristics apply in both directions.
Non-Repetitive Pulse Waveform Shown in Fig. C 10 PEAK PULSE POWER(P PP) OR CURRENT(IPP) DERATING IN PERCENTAGE 100
tf=10�s Peak Value IPPM TA=25 C Pulse Width (td) is defined as the point where the Peak Current Deacys 50% of Ipp 10000Pm(AV), STEADY STATE POWER DISSIPATION, WATTS
FIG.6-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT, UNIDIRECTIONAL
200 TJ=TJmax 8.3ms Single Half Sine-wave JEDEC Method 100
IFSM, PEAK FORWARD SURGE CURRENT, AMPERES