* 1500W surge capability 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1�A above 10V
* Case : DO-201AD Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed * Polarity : Color band denotes cathode end except Bipolar. * Mounting position : Any * Weight : 1.21 gramsFor bi-directional use or CA Suffix Electrical characteristics apply in both directions
Rating 25 �C ambient temperature unless otherwise specified.
Peak Power Dissipation = 25 �C, Tp=1ms (Note1) Steady State Power Dissipation 75 �C Lead Lengths 0.375", (9.5mm) (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method)
(1) Non-repetitive Current pulse, per Fig. 5 and derated above 25 �C per Fig. Mounted on Copper Lead area 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum.
Note: 1 ) VBR measured after It applied for 300 � s., It = square wave pulse or equivalent. = 3.5 Vmax., = 100 Amps. ( 6.8 Volts thru 91 Volts = 5.0 Vmax., = 100 Amps. ( 100 Volts thru 200 Volts ) per 1/2 square or equivalent sine wave. = 8.3 ms, duty cycle = 4 pulses per minute maximum.