Improved glass passivation for high reliability and exceptional stability at high temperature High di/dt and dv/dt capabilities Standard package Low thermal resistance Metric threads version available Types 1600V V DRM / V RRMTypical Applications
Medium power switching Phase control applications Can be supplied to meet stringent military, aerospace and other high-reliability requirements
(1) Units may be broken over non-repetitively in the off-state direction without damage, if dI/dt does not exceed 20A/�s (2) For voltage pulses with tp 5ms
IT(AV) IT(RMS) ITSM Max. average on-state current @ Case temperature Max. RMS on-state current Max. peak, one-cycle non-repetitive surge current
No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Sinusoidal half wave, Initial = TJ max.10ms, no voltage reapplied, = TJ max. (16.7% x IT(AV) IT(AV)), = TJ max. > x IT(AV)),TJ = TJ max.
VT(TO)1 Low level value of threshold VT(TO)2 High level value of threshold voltage rt1 rt2 VTM Low level value of on-state slope resistance High level value of on-state slope resistance Max. on-state voltage
di/dt Max. rate of rise of turned-on current VDRM 600V VDRM 800V VDRM 1000V VDRM 1600V tgt trr tq Typical turn-on time Typical reverse recovery time at = rated VDRM/VRRM, = TJ max., ITM = IT(AV), > 200�s, di/dt = -10A/�s Typical turn-off time = TJ max., ITM = IT(AV), = 100V, di/dt = -10A/�s, dv/dt = 20V/�s linear to 67% VDRM, gate bias to 1600V available on special request. A/�s= TJ max., VDM = rated VDRM Gate pulse = 0.1�s max. ITM = (2x rated di/dt) A
dv/dt Max. critical rate of rise of off-state voltage
= TJ max. linear to 100% rated VDRM = TJ max. linear to 67% rated VDRM
Available with: dv/dt 1000V/�s, to complete code add S90 i.e. 25RIA160S90.
PGM IGM -VGM IGT Maximum peak gate power PG(AV) Maximum average gate power Max. peak positive gate current Maximum peak negative gate voltage DC gate current required to trigger 60 35 VGT DC gate voltage required to trigger IGD VGD DC gate current not to trigger DC gate voltage not to trigger = TJ max., VDRM = rated value = TJ max. VDRM = rated value Max. gate current/ voltage not to trigger is the max. value which will not trigger any unit with rated VDRM anode-to-cathode applied Max. required gate trigger current/ voltage are the lowest value which will trigger all units 6V anode-tocathode applied