2SB0942 Datasheet

V<SUB>CEO</SUB>(V) = -60 ;; I<SUB>C</SUB>(A) = -4 ;; HFE(min) = 40 ;; HFE(max) = 250 ;; Package = TO-220F-A1


Features, Applications

High forward current transfer ratio hFE which has satisfactory linearity Large collector-emitter saturation voltage VCE(sat) Full-pack package which can be installed to the heat sink with one screw

Parameter Collector-base voltage (Emitter open) 2SB0942 2SB0942A VCEO VEBO IC ICP 25�C Tj Tstg Symbol VCBO Rating +150 �C

Collector-emitter voltage 2SB0942 (Base open) 2SB0942A Emitter-base voltage (Collector open) Collector current Peak collector current Collector power dissipation Junction temperature Storage temperature

Parameter Collector-emitter voltage (Base open) Base-emitter voltage Collector-emitter cutoff current (E-B short) 2SB0942 2SB0942A ICEO IEBO * hFE2 Collector-emitter saturation voltage Transition frequency Turn-on time Storage time Fall time VCE(sat) fT ton tstg 2SB0942 2SB0942A VBE ICES VCE -3 A VCE -60 V, VBE = 0 VCE -80 V, VBE = 0 VCE = 0 VEB = 0 VCE -1 A VCE 0.4 A VCE = 10 MHz 0.4 A VCC -50 V MHz �s Symbol VCEO Conditions = -30 mA, = 0 Min V �A Typ Max Unit V

Collector-emitter cutoff current (Base open) Emitter-base cutoff current (Collector open) Forward current transfer ratio

Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. 2. Rank classification Rank to 250

Note) The part numbers in the parenthesis show conventional part number.
100�100�2mm Al heat sink 50�50�2mm Al heat sink (4)Without heat sink (PC=2W)

Request for your special attention and precautions in using the technical information and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.



Download DataSheet PDF View and Download

Manufacturer information

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us


One to One Customer Service