& Y EMI/RFI FILTER TYPES: ACROSS-THE-LINE, LINE-BY-PASS, ANTENNA COUPLING
Vishay Cera-Mite AC Line Rated Discs are rugged, high voltage capacitors specifically designed and tested for use on 125 Volt through 600 Volt AC power sources. Certified to meet demanding & Y type worldwide safety agency requirements, they are applied in across-the-line, line-to-ground, and line-by-pass filtering applications. Vishay Cera-Mite offers the most complete selection in the industry six product families AC LINE RATED CERAMIC CAPACITOR SPECIFICATIONS exactly tailored to your needs. Worldwide Safety Agency Recognition - Underwriters Laboratories UL1283 - Canadian Standards Association - CSA 22.2 No. 1 & No. 8 - European EN132400 to IEC 384-14 Second Edition Required In AC Power Supply and Filter Applications Six Families Tailored To Specific Industry Requirements Complete Range of Capacitance Values
PERFORMANCE DATA / SERIES: 125L 20VL Application Voltage Range (Vrms 50/60 Hz) (Note 1) Dielectric Strength (Vrms 50/60 HZ for 1 minute) Dissipation Factor (Maximum) 2% Insulation Resistance (Minimum) 1000 F Mechanical Data Service Temperature 125�C Maximum; Coating Material per UL94V0 Temperature Characteristics Y5S Y5V See Part Number Detail for Temperature CharacteristicsSAFETY AGENCY RECOGNITION AND EMI/RFI FILTERING SUBCLASS
Series / Recognition / Voltage 125L 20VL Underwriters Laboratories Inc.: (Note UL 1414 Across-The-Line UL 1414 Antenna Coupling Antenna-Coupling UL 1414 Line-By-Pass UL 1414 Rated Voltage 250 VAC 250 VAC 250 VAC 250 VAC 250 VAC Electromagnetic Interference Filters EMI Filters EMI Filters EMI Filters EMI Filters EMI Filters UL1283 Rated Voltage 600 VAC 250 VAC 250 VAC 250 VAC 250 VAC Canadian Standards Association: CSA 22.2 No.1 Across-The-Line CSA 22.2 No.1 Isolation CSA 22.2 No. 1 Rated Voltage 250 VAC 250 VAC 250 VAC 250 VAC 125/250 VAC CSA 22.2 No. 8 Line-to-Ground Capacitors Line-To-Ground For Use in Certified EMI Filters Certified EMI Filters Certified EMI Filters Certified EMI Filters Certified EMI Filters CSA 22.2 No. 8 Rated Voltage 400 VAC 400 VAC 400 VAC 250 VAC European CENELEC Electronic Components Committee (CECC) 400 to Publication IEC 384-14 Table II, Edition 2: IEC 384 -14 Second Edition Subclass Y: (Note Y2 Y4 Subclass Y Voltage (Vrms 50-60 Hz) 500 VAC 300 VAC 250 VAC 250 VAC 125 VAC Type of Insulation Bridged Double or Basic or Basic or Basic or Basic or Reinforced Supplementary Peak Impulse Voltage Before Endurance Test 2.5 kV IEC 384-14 Second Edition Subclass X: (Note X1 X2 Subclass X Voltage (Vrms 50-60 Hz) 400 VAC 400 VAC 400 VAC 400 VAC 400 VAC 400 VAC Peak Impulse Voltage in Service 2.5 kV Application High Pulse High Pulse High Pulse High Pulse High Pulse Gen. Purpose Damp Heat, Steady State Recognition Code HKF + 125�C/21 days
Note 1 Voltage Ratings: All ratings are manufacturer's rating. Part markings are governed by agency rules and customer requirements. Parts are marked 250 VAC unless otherwise requested. Note 2 UL1414 Across-The-Line, Antenna Coupling, and Line-By-Pass Capacitors: Across-The-Line A capacitor connected either across a supply circuit or between one side of a supply circuit and a conductive part that may be connected to earth ground. Antenna-Coupling A capacitor connected from an antenna terminal to circuits within an appliance. Line-By-Pass--A capacitor connected between one side of a supply circuit and an accessible conductive part. Note 3 IEC 384-14 Subclass Y Capacitors: A capacitor of a type suitable for use in situations where failure of the capacitor could lead to danger of electric shock. Class Y capacitors are divided into sub- classes based on type of insulation bridged and voltage ranges. For definitions of basic, supplementary, double and reinforced insulation, see IEC Publication 536. Subclass Y capacitors may be used in applications which require a Subclass X rating. Note 4 IEC 384-14 Subclass X Capacitors: A capacitor of a type suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. Class X capacitors are divided into subclasses according to the peak impulse test voltage superimposed on the main voltage Note 5 AC Leakage Current: For all Series (except - AC Leakage Current (mA) specified at 250 Vrms, 60 Hz. For 125L Series - AC Leakage Current (mA) specified at 125 Vrms, 60Hz. Note 6 Alternate Lead Spacings of 7.5mm and 10mm are available bulk or tape & reel. European Required Minimum Lead Clearance (Prevents Use of Inside on 440L Series; (3mm) on all other series.
Rugged, High Dielectric Strength, Full UL Recognition, & Y1 Applications UL 1283 CSA 22.2 IEC 384-14 Across-The-Line EMI Filters No. 1 - Across-The-Line 2nd Edition Antenna Coupling No. 1 - Isolation - 500 VAC Line-By-Pass - 400 VAC
Full UL 1414 Recognition, & Y2 Applications UL 1283 CSA 22.2 IEC 384-14 Across-The-Line EMI Filters No. 1 - Across-The-Line 2nd Edition Antenna Coupling No. 1 - Isolation - 300 VAC Line-By-Pass No. 8 - EMI Filters - 400 VAC
Fig 7 Optional 3-Leaded Style An optional 3-leaded construction is available. It consists of a single capacitor with the two outside leads attached to one electrode, and the center lead attached to the other electrode. Used in feed-thru or line-to-ground applications, it allows a short ground lead for enhanced high frequency performance.
Agency Files/ Licenses Underwriters Laboratories Inc. UL 1414 Antenna-Coupling Components UL 1414 Line-By-Pass Components UL 1283 Electromagnetic Interference Filters Canadian Standards Association: CSA 22.2 No.1 Across-The-Line, Isolation CSA 22.2 No.1 Isolation CSA 22.2 No. 8 EMI Filters Country Certifications: VDE SEV SEMKO NEMKO DEMKO FIMKO 20VL E128046
Compact Size for EMI Filtering, & Y2 Applications UL 1283 CSA 22.2 IEC 384-1 Line-By-Pass EMI Filters No. 1 - Isolation 2nd Edition No. 8 - EMI Filters - 250 VAC - 400 VAC
Temperature Stable & Y2 Applications UL 1283 CSA 22.2 IEC 384-14 Line-By-Pass EMI Filters No. 1 - Isolation 2nd Edition No. 8 - EMI Filters - 250 VAC - 400 VAC
Economical, Line-by-Pass, & Y4 Applications UL 1414 CSA 22.2 IEC 384-14 2nd Edition Line-By-Pass No. 1 - Isolation - 125 VAC - 400 VAC
High Cap Valve, Compact Size, X2 Applications UL 1283 CSA 22.2 IEC 384-14 2nd Edition EMI Filters No. 8 - EMI Filters - 400 VAC
VALUE �F TOL.009.010.010.020.100 VISHAY CERA-MITE NUMBER 20VLP10 * TEMP CHAR. Y5V D DIAMETER (in/mm).530 T THICKNESS (in/mm).150 LS LEAD SPACE (in/mm).375 Note 6 WIRE SIZE (AWG/in/mm)