4.0 Amps Single Phase Full Wave Bridge Rectifier
Diode chips are glass passivated Easy to assemble & install on P.C.B. High Surge Current Capability High Isolation between terminals and molded case (1500 VRMS) Lead free terminals solderable as per MIL-STD-750 Method 2026 Terminals suitable for high temperature soldering at 260�C for 8-10 secs UL E160375 approvedDescription
These GBL Series of Single Phase Bridges consist of four glass passivated silicon junction connected as a Full Wave Bridge. These four junctions are encapsulated by plastic molding technique. These Bridges are mainly used in Switch Mode power supply and in industrial and consumer equipment.
Type number Voltage Code VRRM , max repetitive peak rev. voltage = TJ max. V VRMS , maximum RMS voltage = TJ max. V IRRM max. @ rated VRRM 25�C �A IRRM max. @ rated VRRM 150�C �A
IO IFSM Maximum DC output current Maximum peak, one-cycle non-repetitive surge current, following any rated load condition and with rated VRRM reapplied I2t VFM IRM VRRM Maximum 2 t for fusing, initial = TJ max Maximum peak forward voltage per diode Typical peak reverse leakage curren t per diode Maximum repetitive peak reverse voltage range = 25 oC, IFM = 25 oC, 100% VRRM = 150�C
TJ Tstg RthJC RthJA W Operating and storage temperature range Max. thermal resistance junction to case Thermal resistance, junction to ambient Approximate weight (0.07) g (oz) 22 �C/ W DC rated current through bridge (1) 6.5 �C/ W DC rated current through bridge (1)Bridge current Basic Part Number Voltage Code: code 100 = VRRM