|54AC244 54ACT244 Octal Buffer/Line Driver with TRI-STATE Outputs
54AC244 54ACT244 Octal Buffer/Line Driver with TRI-STATE � Outputs
The is an octal buffer and line driver designed to be employed as a memory address driver, clock driver and bus-oriented transmitter/receiver which provides improved PC board density.Features
n ICC and IOZ reduced 50% n TRI-STATE outputs drive bus lines or buffer memory address registers n Outputs source/sink n 'ACT244 has TTL-compatible inputs n Standard Microcircuit Drawing (SMD) 'ACT244: 5962-87760
TRI-STATE is a registered trademark of National Semiconductor Corporation. FACT is a registered trademark of Fairchild Semiconductor Corporation.
If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (VCC) DC Input Diode Current (IIK) VI = VCC 0.5V DC Input Voltage (VI) DC Output Diode Current (IOK) VO = VCC 0.5V DC Output Voltage (VO) DC Output Source or Sink Current (IO) DC VCC or Ground Current per Output Pin (ICC or IGND) Storage Temperature (TSTG) Junction Temperature (TJ) CDIP -0.5V to VCC -0.5V to VCC + 0.5V
Supply Voltage (VCC) 'AC 'ACT Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) 54AC/ACT Minimum Input Edge Rate (V/t) 'AC Devices VIN from 70% of VCC 4.5V, 5.5V Minimum Input Edge Rate (V/t) 'ACT Devices VIN from to 2.0V VCC 0V to VCC 0V to VCC to +125�C
Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT � circuits outside databook specifications.
Symbol Parameter VCC (V) VIH Minimum High Level Input Voltage VIL Maximum Low Level Input Voltage VOH Minimum High Level Output Voltage to +125�C Guaranteed Limits (Note 2) VIN = VIL or VIH 4.5 5.5 VOL Maximum Low Level Output Voltage (Note 2) VIN = VIL or VIH 4.5 5.5 IIN Maximum Input Leakage Current V �A IOL VI = VCC, GND mA V IOUT �A V IOH mA V IOUT �A V VOUT 0.1V or VCC 0.1V V VOUT 0.1V or VCC - 0.1V Units Conditions