n ICC reduced 50% n Outputs source/sink mA n Standard Military Drawing (SMD) 'AC86: 5962-89550
FACTTM is a trademark of Fairchild Semiconductor Corporation. TRI-STATE is a registered trademark of National Semiconductor Corporation.
If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (VCC) +7.0V DC Input Diode Current (IIK) -0.5V to VCC +0.5V DC Input Voltage (VI) DC Output Diode Current (IOK) VO = VCC -0.5V to VCC +0.5V DC Output Voltage (VO) mA DC Output Source or Sink Current O) DC VCC or Ground Current 50 mA Per Output Pin (ICC or IGND) to +150�C Storage Temperature (TSTG) Junction Temperature (TJ) CDIP 175�C
Supply Voltage (VCC) 'AC Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) 54AC Minimum Input Edge Rate (V/t) 'AC Devices VIN from 70% of VCC 0V to VCC 0V to VCC to +125�C
Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACTTM circuits outside databook specifications.
Symbol Parameter VCC (V) VIH Minimum High Level Input Voltage VIL Maximum Low Level Input Voltage VOH Minimum High Level Output Voltage to +125�C Guaranteed Limits (Note 2) VIN = VIL or VIH 4.5 5.5 VOL Maximum Low Level Output Voltage (Note 2) VIN = VIL or VIH 4.5 5.5 IIN IOZ IOLD IOHD Maximum Input Leakage Current Maximum TRI-STATE � (Note 3) Minimum Dynamic Output Current mA VI (OE) = VIL, VIH VO = VCC, GND VOLD = 1.65V Max VOHD = 3.85V Min V �A IOL 12 mA IOL 24 mA IOL VI = VCC, GND V IOH -12 mA IOH -24 mA IOH -24 mA IOUT �A V IOUT �A V VOUT 0.1V or VCC 0.1V V VOUT 0.1V or VCC - 0.1V Units ConditionsSymbol Parameter VCC (V) ICC Maximum Quiescent Supply Current
Note 2: All outputs loaded; thresholds on input associated with output under test. Note 3: Maximum test duration 20 ms, one output loaded at a time.
Note 4: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. ICC for 25�C is identical @ 25�C.
VCC Symbol Parameter (V) (Note 5) Min tPHL tPLH Propagation Delay Inputs to Outputs Propagation Delay Inputs to Outputs
Symbol CIN CPD Parameter Input Capacitance Power Dissipation Capacitance Typ 4.5 35 Units pF Conditions VCC = Open VCC = 5.0V