Homedatasheet5082-7736

5082-7736 Datasheet

Pin Diode Chip For Hybrid Mic Switches/attenuators
Share:
Manufacturer

Description

Features, Applications
PIN Diode Chips for Hybrid MIC Switches/Attenuators Technical Data
Features
Description

These PIN diode chips are silicon dioxide or nitride passivated. The 5082-0001 has a mesa construction and the 5082-0012 has a planar construction. The fabrication processes are optimized for long term reliability and tightly controlled for uniformity in electrical performance.

Applications

These general purpose PIN diodes are intended for low power switching applications such as duplexers, antenna switching matrices, digital phase shifters, time multiplex filters, TR switches, pulse and amplitude modulators, limiters, leveling circuits, and attenuators. The 5082-0001 is optimized for applications requiring fast switching.

Bottom Contact Au. Anode Au. Cathode Dimensions in millimeters (1/1000 inch)

Junction Operating and Storage Temperature Range............................................................. to +150�C Soldering Temperature 5082-0001.............................................................. +300�C for 1 min. max. 5082-0012.............................................................. +425�C for 1 min. max.

Chip Part Number 50820001 0012 Nearest Equivalent Packaged Part No. 50823041 3001 Minimum Breakdown Voltage VBR (V) VR = VBR Measure 10 mA Maximum Junction Capacitance Cj (pF) 50 V *VR = 20 MHz

Typical Series Resistance 100 mA *IF = 100 MHz Typical Reverse Recovery Time trr (ns) V 90% Recovery

1. Storage Devices should be stored in a dry nitrogen purged dessicator or equivalent. 2. Cleaning If required, surface contamination may be removed with electronic grade solvents. Typical solvents, such as freon (T.F. or T.M.C.), acetone, deionized water, and methanol, or their locally approved equivalents, can be used singularly or in combinations. Typical cleaning times per solvent are one to three minutes. DI water and methanol should be used (in that order) in the final cleans. Final drying can be accomplished by placing the cleaned dice on clean filter paper and drying with

an infrared lamp for 5-10 minutes. Acids such as hydrofluoric (HF), nitric (HNO3) and hydrochloric (HCl) should not be used. The effects of cleaning methods/ solutions should be verified on small samples prior to submitting the entire lot. Following cleaning, dice should be either used in assembly (typically within a few hours) or stored in clean containers in a reducing atmosphere or a vacuum chamber. 3. Die Attach a. Eutectic 5082-0001 AuSn preform with stage temperature of 300�C for one minute max.

5082-0012 AuSn preform with stage temperature of 310�C for one minute max. AuGe preform with stage temperature of 390�C for one minute max. b. Epoxy For epoxy die-attach, conductive silver-filled or gold-filled epoxies are recommended. This method can be used for all Agilent PIN chips. 4. Wire Bonding Either ultrasonic or thermocompression bonding techniques can be employed. Suggested wire is pure gold, to 1.5 mil diameter. Ultrasonic bonding method should be avoided for the 5082-0001 diode chip.

www.semiconductor.agilent.com Data subject to change. Copyright � 1999 Agilent Technologies 5965-8880E (11/99)


Features

Parameters


Manufacturer information

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
Request for Datasheet

  • Part No     :
  • Your Email:
  • Content     :

related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227