|2.54mm Square � OptopipeTM Optical Light Pipe, 12 Array
Solder Pad/Holes layout shown is for bi-color LEDs listed under "Recommended" category Contact factory for other layoutsFeatures
High transmissivity polycarbonate material UL94V-0 compliance ESD protection (circuit isolation from front panel) Arrays reduce insertion costs Secures to PCB by press-fit
For absolute maximum ratings and other electrical and optical data on the recommended LEDs, refer to LED data sheets.
This OptopipeTM is held in place by 4 press-fit pins located in the corners of the device. Four of the elements are slightly longer to fit into the panel openings; thereby, providing additional support for the OptopipeTM. The LEDs are mounted a 3.76mm pitch. The recommended light sources are Dialight's 597 Series or PLCC-4 Type SMT LEDs. The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index. Dialight can provide custom OptopipeTM solutions for your applications.
Dialight Corporation 1501 Route 34 South Farmingdale, NJ 07727 TEL: (732) 919-3119 FAX: (732) 751-5778www.dialight.com
Dialight’s extensive product range covers all your visual indication needs. From discrete through-hole LEDs or MicroLED® surface-mount LEDs, to Through Hole CBI® and Prism® vertical and right-angle indicators that precisely locate lensed indicators on your panel or display, to engineered OptoPipe® light-pipes that channel light around obstacles, to panel-mount LED indicators with NEMA, IP and UL ratings, to lamp holders and lens caps for high-voltage applications, to replacement LED bulbs, Dialight has an indicator for every application.
Our range of high-power LED optics, LED lighting modules, and LED drivers allow for the immediate deployment of solid-state light in industrial applications with virtually no design effort or expertise. Bring Dialight’s quality, reputation, and more than 70 years of experience to light in your indication or industrial lighting application.