|5mm LED CBI� Circuit Board Indicator Square Back Housing, Quad Block
COLOR* Green Yellow Red Red, 5V Green, 5V Yellow, 5V Red Yellow Green Yellow Red Orange Red/Green Yellow/Green Red Green YellowCATHODE Red Cathode for Red/Green Bi-Color Yellow Cathode for Yellow/Green Bi-Color
Dimension 3.43 [.135] for 5.0 [.197] for all others Dimension B:.635 [.025] for -0705,.508 [.020] for all others Hole Diameter: for.635 [.025] leads, 1.02 [.040] for all othersStandard Polarity shown in drawing: Cathode right
Multiple CBIs form horizontal LED arrays 6.35mm (0.250") center-lines. High Contrast, 94 V-0 rated, black housing Oxygen index: 32% Polymer content: PBT, 0.755 g Housing stand-offs facilitate PCB cleaning Solderability per MIL-STD-202F, method 208FSUPER BRIGHT, WATER CLEAR (Non-tinted, Non-diffused)
LEDs are safe for direct viewing per IEC 825-1, EN-60825-1 Compatible with: 550-xx05 Single Block 550-xx05-003 Tri BlockContact factory for information on custom color combinations
Reverse Polarity (Cathode Left) option available. See Part Number Ordering Code.
PART NUMBER ORDERING CODE Polarity Option 0 - Standard Cathode Right LED Type 1 - Reverse Cathode Left
Dialight Corporation 1501 Route 34 South Farmingdale, NJ 07727 TEL: (732) 919-3119 FAX: (732) 751-5778www.dialight.com
GENERAL PURPOSE Part Number 550-0305-004 550-0405-004 Color Green Yellow Red Peak Wavelength 635 IV mcd 12.3 VF Volts 2.1 2See page 6-55 and 6-56 for Reference Only LED Drive Circuit Examples. See page 6-58 for Pin Out
550-3005-004 Red/Green 550-3105-004 Yellow/Green SUPER BRIGHT, DIFFUSED Part Number 550-5205-004 550-5305-004 Color Red Green Yellow
SUPER BRIGHT, WATER CLEAR (NON-TINTED, NON-DIFFUSED) Part Number 550-5605-004 550-5705-004 Color Red Green Yellow Peak Wavelength 583 IV mcd 140 VF Volts 2.3 2.2 Test Current (mA) 20 Viewing Angle LED Data sheet 521-9465 521-9466 Page
ABSOLUTE MAXIMUM RATINGS (TA=25�C) Forward Voltage (V) Derating (V/�C) From 50�C Operating Temperature (�C) Storage Temperature (�C) Soldering Temperature
OPERATING CHARACTERISTICS (TA=25�C) Luminous Intensity (mcd) Min. = 5V Typical Peak Wavelength (nm) Peak Viewing Angle (2 Forward Current (I) = 5V Reverse Voltage (V), IR=100�A Typical Max Min.is the off axis angle at which the luminous intensity is half the axial luminous intensity
Dialight’s extensive product range covers all your visual indication needs. From discrete through-hole LEDs or MicroLED® surface-mount LEDs, to Through Hole CBI® and Prism® vertical and right-angle indicators that precisely locate lensed indicators on your panel or display, to engineered OptoPipe® light-pipes that channel light around obstacles, to panel-mount LED indicators with NEMA, IP and UL ratings, to lamp holders and lens caps for high-voltage applications, to replacement LED bulbs, Dialight has an indicator for every application.
Our range of high-power LED optics, LED lighting modules, and LED drivers allow for the immediate deployment of solid-state light in industrial applications with virtually no design effort or expertise. Bring Dialight’s quality, reputation, and more than 70 years of experience to light in your indication or industrial lighting application.