Homedatasheet66058-002

66058-002 Datasheet

Single or Dual Channel, 8 Pin Dip, Hermetic, Similar to 6N140 in Smaller Pkg.
Share:
Manufacturer

Description

Features, Applications

SINGLE/DUAL CHANNEL, LOW-INPUT CURRENT, OPTOCOUPLER (Electrically similar to 6N140)

Features: DSCC Approved 8978501PX (Dual) and 8981001PX (Single) High current transfer ratio: 1000% typical 1500 Vdc isolation test voltage Low input current requirement: 0.5mA

Applications: Telephone ring detection Voltage level shifting Isolated receiver input Communication systems Medical systems

DESCRIPTION The 66058 single/dual optocoupler utilizes infrared LEDs optically coupled to high gain photodarlington detectors. This unique optocoupler provides high CTR and low leakage current over the full military temperature range to +125�C). The a 8 pin dual-in-line, hermetically sealed package and is available in standard and screened versions or tested to customer specifications. ABSOLUTE MAXIMUM RATINGS Storage Temperature........................................................................................................................................... to +150�C Operating Free-Air Temperature Range............................................................................................................. to +125�C Lead Solder Temperature.........................................................................................260�C for 10s (1.6mm below seating plane) Peak Forward Input Current (each channel)................................................................................................ 20mA (1ms duration) Average Forward Input Current.......................................(see Note 1)...............................................................................10mA Reverse Input Voltage...............................................................................................................................................................5V Output Current - IO (each channel)......................................................................................................................................40mA Output Power Dissipation (each channel)........................(see Note 2)..............................................................................50mW Supply Voltage - VCC..........................................................(see Note to 20V Output Voltage - VO (each channel)...............................(see Note to 20V Package Dimensions

Notes: 1. Derate at 0.33 mA/�C above 110�C. 2. Collector output power plus one half of the total supply power is total output power. Derate at 1.66mW/�C above 110�C. 3. The lowest total IOH over temperature is developed by keeping VCC as low as possible, but greater that 2 volts. The negative voltage at the detector side should be applied to Pin 10.

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E. Walnut St., Garland, (972) 272-3571 Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com

Logic Low Output Voltage Logic High Output Current High Level Output Current Low Level Supply Current Input Forward Voltage Input Reverse Breakdown Voltage Input-Output Insulation Leakage Current Propagation Delay Time To High Output Level Propagation Delay Time To Low Output Level -XX1 -XX2

Input Capacitance (Input-Output) Input Diode Temperature Coefficient Resistance (Input-Output) Resistance (Input-Input) Input-Input Insulation Leakage Current Common Mode Transient immunity at High Output Level

f = MHz, = 1.6mA VI--O = 25�C VI--I = 25�C Relative Humidity = 45% VI--I = 5s VCM = 50V P-P,VCC IF = OmA, = 25�C

Common Mode Transient CML 500 1000 V/�s VCM = 50V P-P,VCC 5.0V, 8,9 Immunity at Low Output Level = 25�C NOTES: 1. Each channel. 2. CURRENT TRANSFER RATIO is defined as the ratio of output collector current, IO, to the forward LED input current., IF , times = 2�A for channel under test. For all other channels, 10mA. 4. Device considered a two-terminal device. 5. Measured between each input pair shorted together and all output pins shorted together. 6. Measured between each input pair shorted together. 7. CMH is the maximum tolerable common mode transient to assure that the output will remain in a high logic state (ie. @.0V). 8. CML is the maximum tolerable common mode transient to assure that the output will remain in a low logic state (ie. 9. In applications where dv/dt may exceed 50,000 V/�s (such as static discharge) a series resistor, RCC , should be included to protect the detector IC's from destructively high surge currents. The recommended value is RCC k 0.6IF (mA)

PARAMETER Input Current, Low Level Input Current, High Level Supply Voltage SYMBOL IFL IFH VCC MIN 0.5 2.0 MAX 5 18 UNITS mA V

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E. Walnut St., Garland, (972) 272-3571 Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com


Features

Parameters

Download DataSheet PDF View and Download


Manufacturer information

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227