CMM6004-AH Datasheet

Cellular RF ic Mmic Power Amplifiers, 0.25-6.0 GHZ


Features, Applications

Advanced Product Information February of 6) Features to 6.0 GHz Frequency Range 41 dBm Output 1.7 dB Noise Figure 18.5 dB Gain 23 dBm P1dB LGA Package Single Power Supply Single Input Matching Applications Wireless Local Loop Transmit and Receive UNII Transmit and Receive Dual Band 802.11 WLAN Description

The is a high dynamic range amplifier designed for applications operating within the to 6.0 GHz frequency range. is an ideal solution for numerous transmit and receive functions in wireless local loop (WLL) and UNII applications where high linearity is required. The amplifier has the flexibility of being optimized for a number of wireless applications. is an ideal solution when used as a driver amplifier in applications including cellular and PCS (personal communications service) operating from to 2.2 GHz; MMDS (multichannel multipoint distribution systems) operating from to 2.7 GHz; WLAN (wireless LAN) operating at 2.4 GHz; WLL (wireless local loop) operating at 3.5 GHz; and HiperLAN (high performance LAN) and U-NII (unlicensed national information infrastructure) operating from to 6.0 GHz. The CMM6004-AH is packaged in a low-cost, space efficient, Land Grid Array (LGA) package which provides excellent electrical stability and low thermal resistance. All devices are 100% RF and DC tested. With single input matching the part simplifies design by keeping board space and cost to a minimum.

Unless otherwise specified, the following specifications are guaranteed at room temperature in a Celeritek test fixture.

Frequency Range Gain Input Return Loss Output IP3 Noise Figure Output P1dB Operating Current Range Supply Voltage

Notes: = 22�C, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system 2. Thermal resistance = 50�C/W.
Parameter Rating Parameter Rating Parameter Rating
Operation of this device above any of these parameters may cause damage.

Typical Performance (50 Ohm System) Frequency Gain Input Return Loss Output Return Loss OIP3 Noise Figure Bias 836 MHz dB 40 dBm 1.75 dB Vds 175 mA

IP3 measured with 2 tones at an output power of 5 dBm/tone separated by 10 MHz Gain, Input Return Loss and Output Return Loss vs Frequency

3236 Scott Boulevard, Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095
Advanced Product Information - February 2002 Application Circuit (2.1 GHz)

Typical Performance (50 Ohm System) Frequency Gain Input Return Loss Output return Loss OIP3 Noise Figure Bias 2.1 GHz dB 40 dBm 2.95 dB Vds 175 mA



Manufacturer information

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
Request for Datasheet

  • Part No     :
  • Your Email:
  • Content     :

related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us


One to One Customer Service