0402 and 0603 package options Rated for IEC 61000-4-2, level 4 Withstands multiple ESD strikes Low capacitance and leakage currents for invisible load protection Tape and reel packagingChip Guard� MLA Series Varistor ESD Clamp Protectors
The Chip Guard� CG0402MLA and CG0603MLA Series is based on a multilayer metal oxide technology. The MLA family is designed to protect sensitive electronic circuits from the threat of electrostatic discharge ESD. The MLA series is available from V DC working voltages. The wide operating voltage and temperature range makes this family ideally suited to IC power supplies, signal and control line protection.
Chip Guard� Product Designator Package Option = 0402 Package = 0603 Package Multilayer Series Designator Operating Voltage 18 V
Tolerance 20 % Tape & Reel Packaging = 4,000 pcs. per reel (CG0603MLA Series) = 10,000 pcs. per reel (CG0402MLA Series) Ni barrier terminations are standard on all Chip Guard� part numbers.
Stage 1 Preheat Ambient to Preheating 60 s Temperature Stage 2 Preheat 160 �C Stage 3 Preheat 200 �C Main Heating 40 to
This product can be damaged by rapid heating, cooling or localized heating. Heat shocks should be avoided. Preheating and gradual cooling recommended. Excessive solder can damage the device. Print solder thickness 200 um recommended. Solder gun tip temperature should be kept below 280 �C and should not touch the device directly. Contact should be less than 3 seconds. A solder gun under 30 watts is recommended.