Monoblock construction made from single-liquid epoxy resin assures high sealing capability. V-series internal mechanism assures high operating-position accuracy (�0.4 mm) and long life (10 million operations). A wide operating temperature range 90�C is ideal for any operating environment. General-load at 250 VAC) models and Micro-load models are available.
Model Actuator Pin p plunger u ge With soldered and #187 tab terminals With lead wired Short S o hinge ge lever e With soldered and #187 tab terminals With lead wired Hinge ge Lever e With soldered and #187 tab terminals With lead wired Long o g hinge ge lever e With soldered and #187 tab terminals With lead wired Simulated a ed hinge ge lever e With soldered and #187 tab terminals With lead wired Short S o hinge ge roller o e lever e With soldered and #187 tab terminals With lead wired Hinge ge roller o e lever e With soldered and #187 tab terminals With lead wired Note: D2VW-01-1 D2VW-01-1M (see note D2VW-01L1A-1 D2VW-01L1A-1M (see note D2VW-01L1-1 D2VW-01L1-1M (see note D2VW-01L1B-1 D2VW-01L1B-1M (see note D2VW-01L3-1 D2VW-01L3-1M (see note D2VW-01L2A-1 D2VW-01L2A-1M (see note D2VW-01L2-1 D2VW-01L2-1M (see note D2VW-5-1 D2VW-5-1M (see note D2VW-5L1A-1 D2VW-5L1A-1M (see note D2VW-5L1-1 D2VW-5L1-1M (see note D2VW-5L1B-1 D2VW-5L1B-1M (see note D2VW-5L3-1 D2VW-5L3-1M (see note D2VW-5L2A-1 D2VW-5L2A-1M (see note D2VW-5L2-1 D2VW-5L2-1M (see note 2)
1. The standard lengths of the lead wires (AV0.75f) of models incorporating them are 30 cm. 2. UL/CSA approved lead-wired models use UL/CSA approved lead wire. Model name changes from to D2VW-j-1MS.Specifications
Non-inductive load Resistive load Model D2VW-5 Rated voltage 125 VAC 250 VAC 30 VDC 125 VDC D2VW-01 Note: 125 VAC 30 VDC 0.1 A ----Lamp load 0.4 A ----NC Inductive laod Inductive load NO ------------Motor load NC NO
1. The above current ratings are the values of the steady-state current. 2. Inductive load has a power factor of 0.7 min. (AC) and a time constant 7 ms max. (DC). 3. Lamp load has an inrush current of 10 times the steady-state current. 4. Motor load has an inrush current of 6 times the steady-state current.
Item Operating speed (see note) Operating frequency Insulation resistance Contact resistance Dielectric strength Inrush current Vibration resistance Shock resistance Life expectancy Ambient temperature Ambient humidity Enclosure rating Weight Note: to 1 m/s (at pin plunger) Mechanical: 300 operations/min Electrical: 60 operations/min 100 M min. (at 500 VDC) 100 m max. (initial value) for lead wired models 1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity 1,500 VAC, 50/60 Hz for 1 min between each terminal and ground --Malfunction: 300 m/s2 (approx. 30G) Mechanical: 10,000,000 operations min. Electrical: 1,000,000 operations min. Operating: to 90�C (with no icing) Operating: 95% max. IP67 for lead wire model IP50 for terminal model 16 g (including lead wire) Mechanical: 10,000,000 operations min. Electrical: 100,000 operations min. 15 A max. Malfunction: to 55 Hz, 1.5-mm double amplitude D2VW-5
The operating speed value shown is for pin plunger models. For hinge lever models, this speed is for the plunger parts.Note: All units are in millimeters unless otherwise indicated.
t0.5 Three, #187 tab and soldering terminals AV 0.75f lead wire (red) AV 0.75f lead wire (blue) AV 0.75f lead wire (black)