Slim and Compact with a Long Life H Cover protects the built-in switch from
H Micro load type uses gold cladded
H Designed for gang mounting H Molded terminal types and
Item Actuator Part number Connector type 5A type AC connector
Screw terminal type 0.1A type DC connector D4E-1A10N AC connector D4E-2A00N DC connector D4E-2A10N 5A type Without cable D4E-1A20N With cable D4E-1A21N 0.1A type Without cable D4E-2A20N With cable D4E-2A21NOrdering Information Table continued from previous page
Screw terminal type 0.1A type DC connector D4E-1E10N AC connector D4E-2E00N DC connector D4E-2E10N 5A type Without cable D4E-1E20N With cable D4E-1E21N 0.1A type Without cable D4E-2E20N With cable D4E-2E21N
Note: For Customized Models, refer to Molded Terminal Models or Operation Indicator Models at the end of this data sheet.
2. Actuator A: Roller plunger B: Cross-roller plunger C: Plunger D: Sealed roller plunger E: Sealed cross-roller plunger F: Sealed plunger G: Roller lever H: One-way action roller lever 3. Terminals 00: AC connector 10: DC connector 20: Screw terminals without a cable 21: Screw terminals with a cable (S-FLEX VCTF 3 m)
1. Rated Current at 125 VAC 125 VAC/30 VDC for model with a connector) at 125 VAC 125 VAC/30 VDC for model with a connector)
Model XS2F-D421-450 DC Current AC Type Straight No. of conductors 4 Cable length 5m D4E-jj10N Applicable models D4E-jj00N
Movable Plunger Rubber Cap Rubber cap provides a tight seal and ensures long life Seal Packed Seal packing withstands a pressure of 27 psi (1.9 kgf/cm2) Terminal Protection Cover D4E-jN has a wide wiring space 10 mm Screw Terminal Screw terminal incorporates a M3 screw with a toothed washer Wiring Ease Plug-in connector Bearing ensures smooth resetting even if the roller is pressed with excessive force The actuator withstands a force kg (D4E's actuator withstands a force of 30 kg) Built-in Switch cover ensures high insulation between the terminals and die-cast, meeting UL/CSA standards Die-cast Case Zinc die-cast case is anti-corrosive and toughSpecifications
Rated voltage General-purpose Non-inductive load Resistive load NC 125 VAC 250 VAC 8 VDC 14 VDC 30 VDC 125 VDC 250 VDC Note: A NO Lamp load (1) A ----------NO Inductive load Inductive load A NO Motor load A 1A ----------NO 0.5 A Micro load Non-inductive load Resistive load 0.1 A ----NO
The above current ratings are for steady-state current and the value in parentheses is for models with a connector. Inductive loads have a power factor of 0.4 min. (AC) and a time constant 7 ms max. (DC). Lamp loads have an inrush current of 10 times the steady-state current. Motor loads have an inrush current of 6 times the steady-state current.