HomedatasheetDG412C/D

DG412C/D Datasheet

Improved, Quad, SPST Analog Switches <br> Maxim\'s redesigned DG411/DG412/DG413 analog switches now feature low on-resistance matching between switches (3? max) and guaranteed on-resistance flatness o
Share:
Manufacturer

Description

Features, Applications

Maxim's redesigned DG411/DG412/DG413 analog switches now feature low on-resistance matching between switches (3 max) and guaranteed on-resistance flatness over the signal range (4 max). These low on-resistance switches conduct equally well in either direction. They guarantee low charge injection, low power consumption, and an ESD tolerance of 2000V minimum per Method 3015.7. The new design offers lower off-leakage current over temperature (less than at +85�C). The DG411/DG412/DG413 are quad, single-pole/single-throw (SPST) analog switches. The DG411 is normally closed (NC), and the DG412 is normally open (NO). The DG413 has two NC switches and two NO switches. Switching times are less than 150ns max for tON and less than 100ns max for tOFF. These devices operate from a single to +30V supply, or bipolar to �20V supplies. Maxim's improved DG411/DG412/DG413 are fabricated with a 44V silicongate process.

Plug-In Upgrade for Industry-Standard DG411/DG412/DG413 Improved RDS(ON) Match Between Channels (3 max) Guaranteed RFLAT(ON) Over Signal Range (4) Improved Charge Injection (10pC max) Improved Off-Leakage Current Over Temperature at +85�C) Withstand Electrostatic Discharge (2000V min) per Method 3015.7

Low RDS(ON) (35 max) Single-Supply Operation to +30V Bipolar-Supply Operation to �20V Low Power Consumption (35�W max) Rail-to-Rail Signal Handling TTL/CMOS-Logic Compatible

PART DG411CY DG411C/D TEMP RANGE to +70�C PIN-PACKAGE 16 Plastic DIP 16 TSSOP 16 TSSOP 16 Narrow SO Dice

Sample-and-Hold Circuits Test Equipment Heads-Up Displays Guidance & Control Systems Military Radios Communication Systems Battery-Operated Systems PBX, PABX Audio Signal Routing

Ordering Information continued at end of data sheet. Contact factory for dice specifications.
Pin Configurations and Functional Diagrams continued at end of data sheet.

For pricing, delivery, and ordering information, please contact Maxim Direct 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.

(All Voltages Referenced to V-.) V+.........................................................................................44V GND.....................................................................................25V VL.....................................................(GND -0.3V) to (V+ +0.3V) Digital Inputs, VS, VD (Note -2V) to (V+ or 30mA (whichever occurs first) Continuous Current (any terminal)......................................30mA Peak Current (pulsed 1ms, 10% duty cycle max)............................100mA Continuous Power Dissipation (TA +70�C) 16-Pin Plastic DIP (derate 10.53mW/�C above +70�C).842mW 16-Pin Narrow SO (derate 8.70mW/�C above +70�C)...696mW 16-Pin CERDIP (derate 10.00mW/�C above +70�C)......800mW 16-Pin TSSOP (derate 6.7mW/�C above +70�C)...........457mW 16-Pin QFN (derate 19.2mW/�C above +70�C)...........1538mW Operating Temperature Ranges to +125�C Storage Temperature to +150�C Lead Temperature (soldering, 10s).................................+300�C

Note 1: Signals or IN exceeding or V- are clamped by internal diodes. Limit forward current to maximum current rating.

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

(V+ = 5V, VGND = 0V, VINH = 2.4V, VINL TA = TMIN to TMAX, unless otherwise noted.) PARAMETER SWITCH Analog Signal Range Drain-Source On-Resistance Match Between Channels (Note 4) On-Resistance Flatness (Note 4) Source Off-Leakage Current (Note 7) VANALOG rDS(ON) (Note nA V SYMBOL CONDITIONS MIN TYP (Note 2) MAX UNITS

TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX D A

(V+ = 5V, VGND = 0V, VINH = 2.4V, VINL TA = TMIN to TMAX, unless otherwise noted.) PARAMETER INPUT Input Current with Input Voltage High Input Current with Input Voltage Low SUPPLY Power-Supply Range Positive Supply Current I+ All channels on or off, = -16.5V, VIN or 5V All channels on or off, = -16.5V, VIN or 5V All channels on or off, = -16.5V, VIN or 5V All channels on or off, = -16.5V, VIN = �10V, Figure = �10V, Figure 2 DG413 only, = 35pF, Figure = 1.0nF, VGEN = 0V, RGEN = 0, Figure = 1MHz, Figure = 1MHz, Figure = 1MHz, Figure = 1MHz, Figure = 1MHz, Figure TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX 5 V IINH IINL = 2.4V, all others = 0.8V, all others 2.4V �A SYMBOL CONDITIONS MIN TYP (Note 2) MAX UNITS

Ground Current DYNAMIC Turn-On Time Turn-Off Time

Crosstalk (Note 6) Source Off-Capacitance Drain Off-Capacitance Drain On-Capacitance CS(OFF) CD(OFF) CD(ON) + CS(ON)


Features

Parameters

Download DataSheet PDF View and Download


Manufacturer information

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227