HomedatasheetAD603AR-REEL7

AD603AR-REEL7 Datasheet

Differential Amplifiers
Share:
Manufacturer

Description

The AD603( AD603AR-REEL7 ) is a low noise, voltage-controlled amplifier for use in RF and IF AGC systems. It provides accurate, pin-selectable gains of −11 dB to +31 dB with a bandwidth of 90 MHz or +9 dB to 51+ dB with a bandwidth of 9 MHz. Any intermediate gain range may be arranged using one external resistor. The input referred noise spectral density is only 1.3 nV/√Hz, and power consumption is 125 mW at the recommended ±5 V supplies. The decibel gain is linear in dB, accurately calibrated, and stable over temperature and supply. The gain is controlled at a high impedance (50 MΩ), low bias (200 nA) differential input; the scaling is 25 mV/dB, requiring a gain control voltage of only 1 V to span the central 40 dB of the gain range. An overrange and underrange of 1 dB is provided whatever the selected range. The gain control response time is less than 1 μs for a 40 dB change. The differential gain control interface allows the use of either differential or single-ended positive or negative control voltages. Several of these amplifiers may be cascaded and their gain control gains offset to optimize the system SNR. The AD603 can drive a load impedance as low as 100 Ω with low distortion. For a 500 Ω load in shunt with 5 pF, the total harmonic distortion for a ±1 V sinusoidal output at 10 MHz is typically −60 dBc. The peak specified output is ±2.5 V minimum into a 500 Ω load. The AD603 uses a patented proprietary circuit topology—the X-AMP®. The X-AMP comprises a variable attenuator of 0 dB to −42.14 dB followed by a fixed-gain amplifier. Because of the attenuator, the amplifier never has to cope with large inputs and can use negative feedback to define its (fixed) gain and dynamic performance. The attenuator has an input resistance of 100 Ω, laser trimmed to ±3%, and comprises a 7-stage R-2R ladder network, resulting in an attenuation between tap points of 6.021 dB. A proprietary interpolation technique provides a continuous gain control function that is linear in dB. AD603AR-REEL7 Features • Linear-in-dB gain control • Pin-programmable gain ranges −11 dB to +31 dB with 90 MHz bandwidth 9 dB to 51 dB with 9 MHz bandwidth • Any intermediate range, for example −1 dB to +41 dB with 30 MHz bandwidth • Bandwidth independent of variable gain • 1.3 nV/√Hz input noise spectral density • ±0.5 dB typical gain accuracy AD603AR-REEL7 Applications • RF/IF AGC amplifiers • Video gain controls • A/D range extensions • Signal measurements
Features

Parameters

[{"Name":"Number of Channels:","Value":"1"},{"Name":"Operating Supply Voltage:","Value":"5 V"},{"Name":"Supply Current:","Value":"20 mA"},{"Name":"Maximum Operating Temperature:","Value":"+ 85 C"},{"Name":" Minimum Operating Temperature:","Value":"- 40 C"},{"Name":"Maximum Dual Supply Voltage:","Value":"+/- 6.3 V "},{"Name":"Maximum Input Resistance:","Value":"103 Ohms at +/- 5 V"},{"Name":" Maximum Power Dissipation:","Value":"400 mW"},{"Name":"","Value":""},{"Name":"","Value":""}]

Manufacturer information

HITACHI [HITACHI SEMICONDUCTOR]
Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
Request for Datasheet

  • Part No     :
  • Your Email:
  • Content     :

related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227