Home datasheet AT49BV040A-70VI

AT49BV040A-70VI

4-megabit (512K x 8) Single 2.7-volt Battery-Voltage? Flash Memory
Share:
Manufacturer

Description

Description
The AT49BV040A is a 2.7-volt-only in-system reprogrammable Flash Memory. Its 4 megabits of memory is organized as 524,288 words by 8 bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the device offers access times to 70 ns with power dissipation of just 54 mW over the commercial temperature range.
When the device is deselected, the CMOS standby current is less than 50 μA. To allow for simple in-system reprogrammability, the AT49BV040A does not require high input voltages for programming. Three-volt-only commands determine the read and programming operation of the device. Reading data out of the device is similar to reading from an EPROM; it has standard CE, OE, and WE inputs to avoid bus contention. Reprogramming the AT49BV040A is performed by erasing a block of data and then programming on a byte by byte basis. The byte programming time is a fast 30 μs. The end of a program cycle can be optionally detected by the DATA polling feature. Once the end of a byte program cycle has been detected, a new access for a read or program can begin. The typical number of program and erase cycles is in excess of 10,000 cycles.
The device is erased by executing the erase command sequence; the device internally controls the erase operations. There are two 8K byte parameter block sections, eight main memory blocks, and one boot block.
The device has the capability to protect the data in the boot block; this feature is enabled by a command sequence. The 16K-byte boot block section includes a reprogramming lock out fea ture to provide data integrity. The boot sector is designed to contain user secure code, and when the feature is enabled, the boot sector is permanently protected from being reprogrammed.

Features
Single Supply for Read and Write: 2.7 to 3.6V
Fast Read Access Time – 70 ns
Internal Program Control and Timer
Sector Architecture
   – One 16K Bytes Boot Block with Programming Lockout
   – Two 8K Bytes Parameter Blocks
   – Eight Main Memory Blocks (One 32K Bytes, Seven 64K Bytes)
Fast Erase Cycle Time – 7 Seconds
Byte-by-Byte Programming – 30 μs/Byte Typical
Hardware Data Protection
DATA Polling for End of Program Detection
Low Power Dissipation
   – 15 mA Active Current
   – 50 μA CMOS Standby Current
Typical 10,000 Write Cycles

Features

Parameters

Download DataSheet PDF View and Download


Manufacturer information

ATMEL CORPORATION

Atmel (Microchip Technology) - Atmel was acquired by Microchip in April 2016. Atmel Corporation is an industry leader in the design and manufacture of advanced semiconductors, with focus on microcontrollers, nonvolatile memory, logic, radio frequency (RF) components and sensors. These functions are marketed as standard products, application-specific standard products (ASSPs) or customer-specific products (ASICs) in order to provide a rapid and flexible response to the needs of Atmel’s customers.


Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email support@hqew.net.
Other products data
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Post Buying Request
Latest News & Exhibitons
Contact Us

+86-755-83536845

One to One Customer Service

17190417227