Product data File under Integrated Circuits ICL03 2001 Nov 08
Designed to be used 3.3 V level shifting applications with
5 switch connection between two ports TTL-compatible input levels Package options include plastic small outline (SO) and
PIN NUMBER SYMBOL 1B, 2B GND VCC NAME AND FUNCTION Output enable A port inputs B port outputs Ground (0V) Positive supply voltageDESCRIPTION
The CBTD3306 Dual FET Bus Switch features independent line switches. Each switch is disabled with the associated Output Enable (OE) input is high. The CBTD3306 is characterized for operation from to +85 �C.
SYMBOL tPLH tPHL CIO(OFF) ICC Propagation delay to A Pin capacitance (OFF state) Quiescent supply current PARAMETER CONDITIONS Tamb = 25 �C; GND = 50 pF; VCC OE = VCC VI = VCC or GND TYPICAL 0.25 (MAX) 6.50 3 UNIT pF �A
PACKAGES 8-pin plastic SO 8-pin plastic TSSOP TEMPERATURE RANGE 85 �C ORDER CODE CBTD3306D CBTD3306PW DWG NUMBER SOT96-1 SOT530-1
Standard packing quantities and other packaging data is available at www.philipslogic.com/packaging.
Tamb to +85 �C, unless otherwise specified. SYMBOL VCC VI IOUT IIK Tstg PARAMETER DC supply voltage DC input voltage2 DC output current Input diode current Storage temperature range VI/O < 0 CONDITIONS RATING to +150 UNIT mA �C
NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 3. The package thermal impedance is calculated in accordance with JESD 51.
SYMBOL VCC VIH VIL Tamb DC supply voltage High-level input voltage Low-level Input voltage Operating free-air temperature range PARAMETER LIMITS MIN 2.0 �40 MAX 0.8 +85 UNIT V �C
NOTE: 1. All unused control inputs of the device must be held at VCC or GND to ensure proper device operation.
Tamb to +85 �C, unless otherwise specified. LIMITS SYMBOL VIK II ICC VP ICC CI CIO(OFF) ron 3 PARAMETER Input clamp voltage Input leakage current Quiescent supply current Output high pass voltage Additional supply current per input pin2 Control pins capacitance Port off capacitance On-resistance TEST CONDITIONS VCC �18 mA VCC VI = GND 5.5 V VCC VI = VCC or GND See Figure 1 VCC 5.5 V, one input 3.4 V, other inputs at VCC or GND VI= OE = VCC 64 mA VCC 30 mA VCC 15 mA Tamb +85 �C MIN TYP1 MAX mA pF UNIT
NOTES: 1. All typical values are at VCC 5 V, Tamb = 25 �C. 2. This is the increase in supply current for each input that is at the specified TTL voltage level rather than VCC or GND 3. Measured by the voltage drop between the A and the B terminals at the indicated current through the switch. On-state resistance is determined by the lowest voltage of the two or B) terminals.