HomedatasheetCD430840

CD430840 Datasheet

Style = Phase Control ;; Type = SCR Module ;; Voltage = 800V ;; Current = 40A ;; Circuit Configuration = Dual SCR
Share:
Manufacturer

Description

Features, Applications
Powerex, Inc., Hillis Street, Youngwood, Pennsylvania (724) 925-7272
POW-R-BLOK Dual SCR Isolated Module 40 Amperes to 1600 Volts

Powerex Dual SCR Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. TM POW-R-BLOK has been tested and recognized by the Underwriters Laboratories. CD43__40 Dual SCR Isolated TM POW-R-BLOK Module 40 Amperes to 1600 Volts

Electrically Isolated Heatsinking DBC Alumina (Al2O3) Insulator Glass Passivated Chips DBC Alumina (Al2O3) Baseplate Low Thermal Impedance for Improved Current Capability T UL Recognized (E78240)

Select the complete eight digit module part number from the table below. Example: 1600Volt, 40 Ampere Dual SCR Isolated TM POW-R-BLOK Module

T No Additional Insulation Components Required T Easy Installation T No Clamping Components Required T Reduce Engineering Time

Bridge Circuits & DC Motor Drives Battery Supplies Power Supplies Large IGBT Circuit Front Ends Lighting Control Heat & Temperature Control Welders

Powerex, Inc., Hillis Street, Youngwood, Pennsylvania (724) 925-7272
POW-R-BLOK Dual SCR Isolated Module 40 Amperes to 1600 Volts

Characteristics Repetitive Peak Forward and Reverse Blocking Voltage Non-Repetitive Peak Reverse Blocking Voltage < 5 msec) RMS Forward Current Average Forward Current Peak One Cycle Surge Current, Non-Repetitive 180� Conduction, TC=91�C 180� Conduction, TC=91�C (AC Switch) 180� Conduction, TC=91�C 60 Hz, 100% VRRM reapplied, Tj=125�C 60 Hz, No VRRM reapplied, Tj=125�C 60 Hz, No VRRM reapplied, Tj=25�C 50 Hz, 100% VRRM reapplied, Tj=125�C 50 Hz, No VRRM reapplied, Tj=125�C 50 Hz, No VRRM reapplied, Tj=25�C Peak Three Cycle Surge Current, Non-Repetitive 60 Hz, 100% VRRM reapplied, Tj=125�C 50 Hz, 100% VRRM reapplied, Tj=125�C Peak Ten Cycle Surge Current, Non-Repetitive I t for Fusing for One Cycle, 8.3 milliseconds

Symbol VDRM & VRRM VRSM IT(RMS) IT(AV) ITSM It di/dt

60 Hz, 100% VRRM reapplied, Tj=125�C 50 Hz, 100% VRRM reapplied, Tj=125�C 8.3 ms, 100% VRRM reapplied, Tj=125�C 8.3 ms, No VRRM reapplied, Tj=125�C 8.3 ms, No VRRM reapplied, Tj=25�C 10 ms, 100% VRRM reapplied, Tj=125�C 10 ms, No VRRM reapplied, Tj=125�C 10 ms, No VRRM reapplied, Tj=25�C

Maximum Rate-of-Rise of On-State Current, (Non-Repetitive) Peak Gate Power Dissipation Average Gate Power Dissipation Peak Forward Gate Current Peak Reverse Gate Voltage Operating Temperature Storage Temperature Max. Mounting Torque, M5 Mounting Screw on Terminals Max. Mounting Torque, Module to Heatsink Module Weight, Typical V Isolation @ 25C Circuit to base, all terminals shorted together

Powerex, Inc., Hillis Street, Youngwood, Pennsylvania (724) 925-7272
POW-R-BLOK Dual SCR Isolated Module 40 Amperes to 1600 Volts

Characteristics Repetitive Peak Forward Leakage Current Repetitive Peak Reverse Leakage Current Peak On-State Voltage Threshold Voltage, Low-level Slope Resistance, Low-level Threshold Voltage, High-level Slope Resistance, High-level VTM Coefficients, Full Range Symbol IDRM IRRM VFM V(TO)2 rT2 Test Conditions 16.7% x IT(AV) to IT(AV) I = IT(AV) to ITSM 15% x IT(AV) to ITSM VTM + D Sqrt I Minimum dV/dt Turn-Off Time (Typical) dV/dt t off Linear to 2/3 VDRM Tj=125�C, Gate Open Circuit 50V, -dI/dt=10 A/�s Re-Applied dV/dt = 200 V/�s, Linear 900 V Tj= -40�C, VD=6V, Resistive Load Tj= 25�C, VD=6V, Resistive Load Tj=125�C, VD=6V, Resistive Load Tj= -40�C, VD=6V, Resistive Load Tj= 25�C, VD=6V, Resistive Load Tj=125�C, VD=6V, Resistive Load Tj=125�C, VD=VDRM Tj=125�C, VD=VDRM VD=6V, Resistive Load, Gate Open VD=6V, Resistive Load C= D= (Typical) Min. Max. 4.33 E-3 V/�s �s Units mA

Non-Triggering Gate Voltage Non-Triggering Gate Current Holding Current Latching Current

Characteristics Thermal Resistance, Junction to Case DC Operation Thermal Impedance Coefficients Symbol RJ-C ZJ-C Per Module, both conducting Per Junction, both conducting ZJ-C= K3 (1-exp(-t/3)) Thermal Resistance, Case to Sink Lubricated RC-S K4 (1-exp(-t/4)) Per Module 3.07 E-1 Max. E-2 0.1 �C/W Units �C/W


Features

Parameters


Manufacturer information

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
Request for Datasheet

  • Part No     :
  • Your Email:
  • Content     :

related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227