HomedatasheetCLC404AL

CLC404AL Datasheet

CLC404 - Wideband, High Slew Rate, Monolithic op Amp, Package: Cerdip, Pin Nb=8
Share:
Manufacturer

Description

Features, Applications

The is a high speed, monolithic op amp that combines low power consumption (110mW typical, 120mW maximum) with superior large signal performance. Operating off � 5V supplies, the CLC404 demonstrates a large signal bandwidth (5VPP output) of 165MHz. The bandwidth performance, along with other speed characteristics such as rise and fall time (2.1ns for a 5V step), is nearly identical to the small signal performance since slew rate is not limiting factor in the CLC404 design. With its 175MHz bandwidth and 10ns settling (0.2%), the CLC404 is ideal for driving ultra fast flash A/D converters. The 0.5� deviation from linear phase, coupled with -53dBc 2nd harmonic distortion and -60dBc 3rd harmonic distortion (both 20MHz), is well suited for many digital and analog communication applications. These same characteristics, along with 70mA output current, differential gain of 0.07%, and differential phase at 0.03�, make the CLC404 an appropriate high performance solution for video distribution and line driving applications. Constructed using an advanced, complementary bipolar process and proven current feedback topologies, the CLC404 provides performance far beyond that of other monolithic op amps. The CLC404 is available in several versions to meet a variety of requirements. Enhanced Solutions (Military/Aerospace) SMD Number: 5962-90994 Space level versions also available. For more information, visit http://www.national.com/mil

Features

165MHz large signal bandwidth (5VPP) 2600V/�s slew rate Low Power: 110mW Low distortion: 20MHz 10ns settling 0.2% 0.07% diff. gain, 0.03� diff. phase

Applications

Fast A/D conversion Line drivers Video distribution High speed communications Radar, IF processors Large Signal Pulse Response

Operating Temperature Range Storage Temperature Range Lead Solder Duration (+300�C) ESD rating (human body model)

If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (VCC) IOUT Output is short circuit protected to ground, but maximum reliability will be maintained if IOUT does not exceed... Common Mode Input Voltage Differential Input Voltage Junction Temperature

Thermal Resistance Package 60mA MDIP SOIC (JC) 65�C/W 60�C/W (JA) 120�C/W 140�C/W

= +6, VCC = 500; unless specified Symbol Ambient Temperature Frequency Domain Response SSBW LSBW GFPL GFPH GFR LPD TRS TRL OS SR Settling Time � 0.2% Overshoot Slew Rate (Measured AV +2) (Note 4) 2nd Harmonic Distortion 3rd Harmonic Distortion Equivalent Input Noise SNF INV DG DP VIO DVIO IBN DIBN IBI DIBI PSRR CMRR Noise Floor Integrated Noise Differential Gain (Note 3) Differential Phase (Note 3) Input Offset Voltage (Note 5) Average Temperature Coefficient Input Bias Current (Note 5) Average Temperature Coefficient Input Bias Current (Note 5) Average Temperature Coefficient Power Supply Rejection Ratio Common Mode Rejection Ration Inverting Non Inverting 2VPP,20MHz -3dB Bandwidth -3dB Large Signal Gain Flatness Peaking Rolloff Linear Phase Deviation Rise and Fall Time VOUT < 2VPP VOUT < 5VPP VOUT 75MHz 2V Step 5V Step 2V Step 2V Step Parameter Conditions CLC404AJ Typ +25�C -40�C Max/Min Ratings (Note +25�C +85�C Units

Symbol ICC RIN CIN RO VO CMIR IO Output Impedence Output Voltage Range Common Mode Input Range Output Current Parameter Supply Current (Note 5) Non-Inverting Input

(Continued) = +6, VCC = 500; unless specified Conditions No Load, Quiescent Resistance Capacitance DC No Load For Rated Performance Typ Max/Min Ratings (Note 2) Units V mA

Note 1: "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The table of "Electrical Characteristics" specifies conditions of device operation. Note 2: Max/min ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are determined from tested parameters. Note 3: Differential gain and phase measured 150 1Vpp equivalent video signal, 0-100 IRE, 40 IREpp, = 0 volts, at 75 load and 3.58MHz. See text. Note 4: See the text on the back of the datasheet. Note 5: AJ-level: spec. is 100% tested at +25�C, sample at 85�C.

Package 8-pin plastic DIP 8-pin plastic SOIC 5-pin SOT Temperature Range Industrial to +85�C Part Number CLC404AJE CLC404AJM5 Package Marking CLC404AJE A16 NSC Drawing M08A MA05A


Features

Parameters


Manufacturer information

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
Request for Datasheet

  • Part No     :
  • Your Email:
  • Content     :

related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227