CLC414 Datasheet

Quad, Low-power Monolithic op Amp


Features, Applications

The is a low power, quad, monolithic operational amplifier designed for intermediate gain applications where power and cost per channel are of primary concern. Benefiting from National's current feedback architecture, the CLC414 offers a gain range � 10 while providing stable, oscillation free operation without external compensation, even at unity gain. Operating from � 5V supplies, the CLC414 consumes only 25mW of power per channel, yet maintains a 90MHz small signal bandwidth and a 1000V/�s slew rate. The CLC414 also provides wide channel isolation with its 70dB crosstalk (input referred at 5MHz). Applications requiring a high density solution to high speed amplification such as active filters and instrumentation diff amps will benefit from the CLC414's four integrated, wideband op amps in one 14-pin package. Commercial remote sensing applications and battery powered radio transceivers requiring high performance, low power will find the be an attractive, cost effective solution. In composite video switching and distribution applications, the CLC414 offers differential gain and phase performance at 3.58MHz. The lower power CLC414 and the wideband CLC415 are quad versions of the CLC406. Both of these quads afford the designer lower power consumption and lower cost per channel with the additional benefit of requiring less board space per amplifier. Construction using an advanced, complementary bipolar process and National's proven current feedback architecture, the CLC414 is available in several versions to meet a variety of requirements. Enhanced Solutions (Military/Aerospace) SMD Number: 5962-91693 Space level versions also available.


90MHz small signal bandwidth 2mA quiescent current per amplifier 70dB channel isolation 5MHz 0.1%/0.12� differential gain/phase 16ns settling 0.1% 100V/�s slew rate 3.3ns rise and fall time (2VPP) 70mA output current


Composite video distribution amps HDTV amplifiers RGB video amplifiers CCD signal processing Active filters Instrumentation diff. amps General purpose high density requirements Small Signal Pulse Response

Operating Temperature Range Storage Temperature Range Lead Temperature Range (Soldering 10 sec) ESD Rating (Human Body Model)

If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (VCC) IOUT Output is Short Circuit protected to ground, but maximum reliability will be maintained if IOUT does not exceed... Common Mode Input Voltage Differential Input Voltage Junction Temperature

Thermal Resistance 70mA Package MDIP SOIC (JC) 60�C/W 45�C/W (JA) 110�C/W 115�C/W

(AV = +6, VCC = 500; Unless Specified) Symbol Ambient Temperature Frequency Domain Response SSBW LSBW Gain Flatness GFPL GFPH GFR LPD DP2 XT CXT Time Domain Response TRS TRL HD3 VN ICN NCN SNF INV Overshoot Slew Rate 2nd Harmonic Distortion 3rd Harmonic Distortion Equivalent Noise Input Non-Inverting Voltage Inverting Current Non-Inverting Current Total Noise Floor Total Integrated Noise 2VPP, 5MHz Settling Time to 0.02% Rise and Fall Time 2V Step 5V Step 2V Step 2V Step 2V Step Crosstalk Input Referred Differential Phase, = +2 Peaking Rolloff Linear Phase Deviation Differential Gain, +2 -3dB Bandwidth VOUT < 2VPP VOUT < 5VPP VOUT Parameter Conditions CLC414AJ Typ +25�C -40�C Max/Min (Note +25�C +85�C Units

Symbol Static, DC Performance VIO DVIO IBN DIBN IBI DIBI PSRR CMRR ICC RIN CIN RO VO CMIR IO Input Offset Voltage (Note 3) Parameter

(Continued) (AV = +6, VCC = 500; Unless Specified) Conditions Typ Max/Min (Note 2) Units

Average Temperature Coefficient Input Bias Current (Note 3) Average Temperature Coefficient Input Bias Current (Note 3) Average Temperature Coefficient Power Supply Rejection Ratio Common Mode Rejection Ratio Supply Current (Note 3) Non Inverting Input Resistance Non-Inverting Input Capacitance Output Impedance Output Voltage Range Common Mode Input Range Output Current

Note 1: "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The table of "Electrical Characteristics" specifies conditions of device operation. Note 2: Max/min ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are determined from tested parameters. Note 3: AJ-level: spec. is 100% tested at +25�C.

Package 14-pin plastic DIP 14-pin plastic SOIC Temperature Range Industrial to +85�C Part Number CLC414AJP CLC414AJE Package Marking CLC414AJP CLC414AJE NSC Drawing N14A M14A



Manufacturer information

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
Request for Datasheet

  • Part No     :
  • Your Email:
  • Content     :

related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us


One to One Customer Service