The is a dual, wideband (120MHz) op amp. The CLC416 consumes only 39mW per channel and can source or sink an output current of 60mA. These features make the CLC416 a versatile, high-speed solution for demanding applications that are sensitive to both power and cost. Utilizing National's proven architectures, this dual current feedback amplifier surpasses the performance of alternative solutions and sets new standards for low power. This powerconserving dual op amp achieves low distortion with -80dBc and -80dBc second and third harmonics respectively. Many high source impedance applications will benefit from the CLC416's 6M input impedance. And finally, designers will have a bipolar part with an exceptionally low 100nA non-inverting bias current. With 0.1dB flatness to 30MHz and low differential gain and phase errors, the is an ideal part for professional video processing and distribution. The 120MHz -3dB bandwidth (Av = +2) coupled with a 400V/�s slew rate also makes the CLC416 a perfect choice in cost-sensitive applications such as video monitors, fax machines, copiers, and CATV systems.Features
0.01%, 0.03� DG, D Very low input bias current: 100nA High input impedance: 120MHz -3dB bandwidth (Av = +2) Low power High output current: 60mA Low-costApplications
Desktop video systems Video distribution Flash A/D driver High-speed driver High-source impedance applications Professional video processing High resolution monitorsMHz dB deg % deg ns % V/�s dBc nV/Hz pA/Hz dB mV �V/�C nA nA/�C �A nA/�C V mA
DISTORTION AND NOISE RESPONSE 1MHz 2nd harmonic distortion 3rd harmonic distortion 1MHz 2nd harmonic distortion 10MHz 3rd harmonic distortion 2Vpp, 10MHz equivalent input noise voltage >1MHz inverting current >1MHz non-inverting current >1MHz crosstalk, input referred 2Vpp, 10MHz STATIC DC PERFORMANCE input offset voltage average drift input bias current average drift input bias current average drift power supply rejection ratio common-mode rejection ratio supply current per channel
MISCELLANEOUS PERFORMANCE input resistance non-inverting input capacitance non-inverting common mode input range output voltage range = 100 output voltage range RL = output current output resistance, closed loop
Recommended gain range to +40V/V Transistor count = 110 Min/max ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are determined from tested parameters.
supply voltage Iout is short circuit protected to ground common-mode input voltage maximum junction temperature storage temperature range lead temperature (soldering 10 sec) ESD rating (human body model) �7V �Vcc +300�C 1000V1) At temps < 0�C, spec is guaranteed for 500. A) J-level: spec is 100% tested at +25�C.
Model CLC416AJP CLC416AJE Temperature Range to +85�C Description 8-pin PDIP 8-pin SOIC
Package Plastic (AJP) Surface Mount (AJE) 95�C/W 115�C/W
Frequency (MHz) Open Loop Transimpedance Gain, Z(s)
Phase Negative Sync Gain Negative Sync
Phase Positive Sync Gain Positive Sync
Output Power (dBm) Small Signal Pulse Response
Output Power (dBm) Large Signal Pulse Response