Metal Film Resistors, Military, MIL-R-10509 Qualified, Type RN and MIL-PRF-22684 Qualified, Type RL
Very low noise 40 dB) Very low voltage coefficient (5 ppm/V) Controlled temperature coefficient Flame retardant epoxy coating Commercial alternatives to military styles are available with higher power ratings. See appropriate catalog or web page
VISHAY DALE� MILITARY APPROVED VALUE RANGE MIL STYLE VISHAY DALE MODEL CMF07 CMF20 MAXIMUM WORKING VOLTAGE CHARACTERISTIC MIL-R-10509 MIL-PRF-22684 CHARACTERISTIC - 1M CHARACTERISTIC - 470K DIELECTRIC STRENGTH VAC
Vishay Dale commercial value range: Extended resistance ranges are available in commercial equivalent types. Please contact us by using the email at the bottom of this page.
PARAMETER Voltage Coefficient Insulation Resistance Operating Temperature Range Terminal Strength Solderability UNIT ppm/V �C Ib CONDITION 5 when measured between 10 % and full rated voltage 1010 minimum dry; 108 minimum after moisture test 65/+ 175 (see derating curves for military range) 5 pound pull test for RL07/RL20; 2 pound pull test for all others Continuous satisfactory coverage when tested in accordance with MIL-R-10509 and MIL-PRF-22684New Global Part Numbering: RN60D3483FR36 (preferred part numbering format)
RESISTANCE TOLERANCE VALUE CODE = 25 ppm 3 digit significant = 50 ppm figure, followed = 100 ppm D a multiplier 2.49 M Historical Part Number example: RN60D3483F (will continue to be accepted)
B14 = Tin/Lead, Bulk Blank = Standard R36 = Tin/Lead, T/R (Full) (Dash Number) RE6 = Tin/Lead, T/R (1000 pcs) (up to 1 digit)New Global Part Numbering: RL07S471JR36 (preferred part numbering format)
PACKAGING B14 = Tin/Lead, Bulk R36 = Tin/Lead, T/R (Full) RE6 = Tin/Lead, T/R (1000 pcs)
RESISTANCE VALUE 2 digit significant figure, followed by a multiplier 470 k
Historical Part Number example: RL07S471J (will continue to be accepted)
General: Environmental performance is shown in the Environmental Performance table. Test methods are those specified in MIL-R-10509 and MIL-PRF-22684. Resistance shifts due to storage at room temperature are negligible.
Flame retardant epoxy, formulated for superior moisture protection Fire-cleaned high purity ceramic Standard lead material is solder-coated copper. Solderable and weldable. Shelf Life:
Vishay Dale CMF resistors have an operating temperature range + 175 �C. They must be derated according to the following curves:
MIL-R-10509 and MIL-PRF-22684: The CMF models meet or exceed the electrical, environmental and dimensional requirements of MIL-R-10509 and MIL-PRF-22684. Noise: Vishay Dale metal film resistors have exceptionally low noise level. Average for standard resistance range is 0.10 micro-volt per volt over a decade of frequency, with low and intermediate resistance values typically below 0.05 micro-volt per volt.
Document Number: 31027 Revision: 28-Aug-06 For technical questions, contact: email@example.com
1.0 RN70 NOTE: Commercial equivalents of military styles are available with higher power ratings. Consult factory.
The increase in resistors surface temperature due to rated load is shown in the chart above. Resistor temperature = heat rise + ambient temperature.