HomedatasheetCY7B933-JXC

CY7B933-JXC Datasheet

Telecom Line Management ICs
Share:
Manufacturer

Description

The CY7B923 HOTLink‚ transmitter and CY7B933( CY7B933-JXC ) HOTLink receiver are point-to-point communications building blocks that transfer data over high-speed serial links (fiber, coax, and twisted pair). Standard HOTLink data rates range from 160 to 330 Mbps. Higher speed HOTLink is also available for high-speed applications (160 to 400 Mbits/second). Figure 1 illustrates typical connections to host systems or controllers.Eight bits of user data or protocol information are loaded into the HOTLink transmitter and are encoded. Serial data is shifted out of the three differential PECL serial ports at the bit rate (which is ten times the byte rate). The HOTLink receiver accepts the serial bit stream at its differential line receiver inputs and, using a completely integrated PLL clock synchronizer, recovers the timing information necessary for data reconstruction. The bit stream is deserialized, decoded, and checked for transmission errors. Recovered bytes are presented in parallel to the receiving host along with a byte-rate clock.The 8B/10B encoder/decoder can be disabled in systems that already encode or scramble the transmitted data. I/O signals are available to create a seamless interface with both asynchronous FIFOs (that is, CY7C42X) and clocked FIFOs (that is, CY7C44X). A BIST pattern generator and checker allows testing of the transmitter, receiver, and the connecting link as a part of a system diagnostic check.HOTLink devices are ideal for a variety of applications where a parallel interface can be replaced with a high-speed point-to-point serial link. Applications include interconnecting workstations, servers, mass storage, and video transmission equipment. CY7B933-JXC Features • Fibre Channel-compliant• IBM ESCON®-compliant• DVB-ASI-compliant• ATM-compliant• 8B/10B-coded or 10-bit unencoded• Standard HOTLink®: 160 to 330 Mbps• High-speed HOTLink: 160 to 400 Mbps for high-speed applications• Transistor-transistor logic (TTL)-synchronous I/O• No external phase locked-loop (PLL) components• Triple positive emitter coupled logic (PECL) 100 K serial outputs• Dual PECL 100 K serial inputs• Low-power: 350 mW (Tx), 650 mW (Rx)• Compatible with fiber-optic modules, coaxial cable, and twisted pair media• Built-in self-test (BIST)• Single +5-V supply• 28-pin small outline integrated circuit (SOIC)/plastic leaded chip carrier (PLCC)• Pb-free packages available• 0.8-μ bipolar complementary metal oxide semiconductor (BiCMOS)
Features

Parameters

[{"Name":"Supply Voltage - Max:","Value":"5.5 V"},{"Name":"Supply Voltage - Min:","Value":"4.5 V"},{"Name":"Supply Current:","Value":"85 mA"},{"Name":"Maximum Operating Temperature:","Value":"+ 70 C"},{"Name":" Minimum Operating Temperature:","Value":"0 C"},{"Name":"Number of Channels:","Value":"1"},{"Name":" Operating Voltage:","Value":"5 V"},{"Name":" Data Rate:","Value":"400 Mbps"},{"Name":"","Value":""},{"Name":"","Value":""}]

Manufacturer information

SEME-LAB [SEME LAB]

TT electronics semelab

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
Request for Datasheet

  • Part No     :
  • Your Email:
  • Content     :

related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227