D2010 Datasheet

Video Imaging System For Advanced CCTV Cameras


Features, Applications

The Pixim D2000 Video Imaging System is a highly integrated two chip set utilizing Pixim's innovative new Digital Pixel SystemTM (DPS) technology that provides the image sensor and the necessary intelligence to develop advanced feature, high quality, costeffective color CCTV cameras. The D2000 is designed to deliver superior quality video, providing 95 dB dynamic range in normal operation while providing excellent resolution, sensitivity and color fidelity. The D2000 includes configurable software which allows camera manufacturers to get to market quickly and offer a number of camera products from the same base hardware design, including an option to select PAL / NTSC operation via a jumper or switch. Simultaneous analog (composite, S-video, or component) and digital outputs are available. For advanced applications that utilize additional processing or remote access, the D2000 offers an interface to an external processor. The chip set is manufactured in a high volume commercial 0.18 micron CMOS process, utilizing 1.8V operation for low power dissipation.

Iris Control, DC or Video AC Line Input/ Genlock
CVBS Y/C or YUV H,V D2020 Digital Image Processor SMPTE125 (10bit) UART serial
Ref Clk Auto-iris Lens D2010 Digital Image Sensor PixBus SPI Serial EEPROM 3.3V 1.8V

High resolution color for crisp, clear video Horizontal resolution: >480 TV Vertical resolution: >400 TV Lines High sensitivity for low-light images Wide dynamic range provides excellent quality in high-contrast environments dB (14-bit) typical 120 dB max. Single design supports NTSC, PAL, and digital video Analog: Composite, S-Video, YUV/RGB Digital: 10-bit parallel digital video (ITU/BT656, SMPTE 125) Automatic Exposure Mode for best pictures Numerous Control Options Automatic White Balance Backlight compensation AC line lock, internal or external sync Automatic Gain Control On-screen display Activity / motion detection Electronic Iris Digital Pan / Tilt / Zoom Configurable alarms Auto-Iris control (DC, video)


Pixel type: DPSTM technology Silicon process: 0.18 �m CMOS Image size: diagonal 6.3 mm (Type 1/3") Sensor array size: 5.04mm (H) 3.78 mm (V) Pixel size: x 7 �m Picture elements: total: 742 (H) x 554 (V); effective: 720 (H) x 540 (V) Color filter array: complementary (CMY) Dynamic range: 95 dB typical, 120 dB max Resolution: >480 horizontal TV lines Minimal blooming Zero smear

Standard 1.8V (core) and 3.3V (I/O) supply Typical power: 1.5 W for D2000 chip set Max. power: <2 W for D2000 chip set

17mm; 181 PBGA, 1mm ball pitch 15mm; 144 PBGA, 1mm ball pitch
D2020 Digital Image Processor Silicon process: 0.18 �m CMOS

ARMTM processor core Custom image pipeline Built-in NTSC/PAL video encoder Extensive programmability Histogram engine DIP switch / push-button menu support Camera ID Alarms: on-screen, serial port, GPO, and zoom alarms White balance: auto tracking, manual, and presets Gamma correction options Electronic shutter Wide dynamic range Automatic gain control Backlight compensation control B/W mode Image flip: horizontal Digital Pan/Tilt/Zoom to 4x zoom) Iris selection: DC type, video type, fixed Iris type Exposure control: electronic Iris; DC/Video auto iris lens support Auto iris output: Video or DC drive using internal PWM DAC

Camera Development Kit (CDK) Pixim Manufacturing Application (PMA)

Pixim's patented Digital Pixel SystemTM (DPS) technology marks a fundamental breakthrough in imaging technology. Building upon technology developed at Stanford University in the 1990s, Pixim has created an image capture and processing system that provides high-quality pictures with enhanced dynamic range. Greater dynamic range significantly improves image quality in scenes consisting of both bright and dark areas. The core invention in DPS is the inclusion of an analog-to-digital converter (ADC) within each pixel of the image sensor. The ADC translates the light signal into a digital value at the immediate point of capture, thus minimizing signal degradation and cross-talk in the array and allowing for greater noise reduction methods. Once the data is captured in a digital format, a variety of digital signal processing techniques are used for optimal image reproduction. As imaging technology continues to migrate toward totally digital systems, Pixim's Digital Pixel System technology will provide the foundation for image capture and image processing for the highest quality video and still cameras.

Boot EPROM: serial SPI Iris Control: control Video Iris lenses or DC Iris output CVBS: Composite video signal (75 output) Y/C: standard S-video output (75 output) YUV: component output (75 output) External Sync: H, V TTL output Parallel video: ITU-R656 format 8-bit; SMPTE 125M 10-bit video (CCIR 601) UART: general purpose for configuration, alignment, and remote control GPIO: 12 general input/output pins for camera modes via DIP switches or push buttons

Pixim, Inc. 915 Linda Vista Ave. Mountain View, CA 94043 USA 650-934-0550



Download DataSheet PDF View and Download

Manufacturer information

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us


One to One Customer Service