HomedatasheetD2SW-P

D2SW-P Datasheet

Sealed Subminiature Basic Switch <br> Simplified construction using single leaf spring and rubber packing. <br> Solder, quick-connect terminals (#110), PCB terminals and molded lead wires are availabl
Share:
Manufacturer

Description

Features, Applications

Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series.

Sealed to IEC IP67. Switch rating at 250 VAC possible with a single-leaf movable spring. Models for micro loads are also available. Solder, quick-connect terminals (#110), PCB terminals and molded lead wires are available. Even-pitched PCB terminals are also standardized. RoHS Compliant.

1. Ratings at 250 VAC at 30 VDC 2. Actuator None: Pin plunger L1: Hinge lever L2: Hinge roller lever L3: Simulated roller lever

3. Contact Form None: SPDT -2: SPST-NC (Molded lead wire models only) -3: SPST-NO (Molded lead wire models only) 4. Terminals H: Solder terminals T: Quick-connect terminals (#110) D: PCB terminals (Uneven pitch) B: PCB terminals (Even pitch) M: Molded lead wires

Rating Actuator 2A Pin plunger Hinge lever Hinge roller lever Simulated roller lever 0.1A Pin plunger Hinge lever Hinge roller lever Simulated roller lever Terminal Solder terminals D2SW-P01L2H D2SW-P01L3H Quick-connect terminals D2SW-P01L2T D2SW-P01L3T PCB terminals Uneven pitch D2SW-P01L2D D2SW-P01L3D Even pitch D2SW-P01L2B D2SW-P01L3B Molded lead wires D2SW-P01L2M D2SW-P01L3M

Note: Consult your OMRON sales representative for details on SPST-NO and SPST-NC models.
Specifications

Model D2SW-P2 D2SW-P01 Rated voltage 30 VDC 250 VAC 30 VDC 125 VAC Note: The ratings values apply under the following test conditions. Ambient temperature: 20�2�C Ambient humidity: 65�5% Operating frequency: 20 operations/min. 0.1 A Resistive load 2A

Item Operating speed Operating frequency Insulation resistance Contact resistance (initial value) Dielectric strength (see note 2) Model to 500 mm/s (pin plunger models) Mechanical: 120 operations/min max. Electrical: 20 operations/min max. 100 M min. (at 500 VDC) Terminal models: 50 m max. Molded lead wire models: 100 m max. 1,000 VAC, 50/60 Hz for 1 min. between terminals of the same polarities Terminal models: 100 m max. Molded lead wire models: 150 m max. 600 VAC, 50/60 Hz for 1 min. between terminals of the same polarities D2SW-P01

1,500 VAC, 50/60 Hz for 1 min. between current-carrying metal parts and ground, and between each terminal and non-current-carrying metal parts Vibration resistance (see note 3) Shock resistance (see note 3) Durability (see note 4) Malfunction: to 55 Hz, 1.5-mm double amplitude Destruction: 1,000 m/s2 {approx. 100 G} max. Malfunction: 300 m/s2 {approx. 30 G} max. Mechanical: 1,000,000 operations min. (60 operations/min.) Electrical: 50,000 operations min. (20 operations/min.) IEC IP67 (see note 5) (excluding the terminals on terminal models) to 70�C (at ambient humidity of 60% max.) (with no icing) 85% max. (for to 35�C) Approx. 2 g (pin plunger models with terminals) Mechanical: 1,000,000 operations min. (60 operations/min.) Electrical: 200,000 operations min. (20 operations/min.)

Degree of protection against electric shock Class 1 Proof tracking index (PTI) Ambient operating temperature Ambient operating humidity Weight

Note: 1. The data given above are initial values. 2. The dielectric strength shown in the table indicates a value for models with a Separator. 3. For the pin plunger models, the above values apply for both the free position and total travel position. For the lever models, the values apply at the total travel position. Contact opening or closing time is within 1ms. 4. Consult your OMRON sales representative for testing conditions. 5. The test to meet standards checks for water intrusion after immersion for 30 minutes. The test does not check for switching operation underwater. Refer to "Degree of Protection" or "Instructions for Correct Use".

Consult your OMRON sales representative for specific models with standard approval.
SPST-NC (Molded lead wire models only)

Item Contact Specification Material Gap (standard value) Minimum applicable load (see note) Model D2SW-P2 Rivet Silver alloy at 5 VDC at 5 VDC D2SW-P01 Crossbar Gold alloy

SPST-NO (Molded lead wire models only)
Note: Lead wire colors are indicated in parentheses.

Note: For more information on the minimum applicable load, refer to Using Micro Loads in the Precautions section of this data sheet.

Note: 1. All units are in millimeters unless otherwise indicated. 2. Terminal plate thickness 0.5 mm for all models.


Features

Parameters

Download DataSheet PDF View and Download


Manufacturer information

OMRON CORPORATION
Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227