High-quality watertight, high-precision miniature Snap Action switch. Meets IP67 (IEC 529) requirements (for lead wire types) and IP50 (for terminal types) Monoblock construction assures high sealing capability and is ideal for dusty places or where water is sprayed V-series internal mechanism assures high operating-position accuracy (0.4 mm) and long life (10 million operations) Wide operating temperature range C is ideal for any operating environment General-load at 250 VAC) models and micro-load models are available RoHS Compliant
Model Actuator Pin plunger Terminal With solder and #187 tab terminals With lead wires Short hinge plunger With solder and #187 tab terminals With lead wires Hinge lever With solder and #187 tab terminals With lead wires Long hinge lever With solder and #187 tab terminals With lead wires Simulated roller lever With solder and #187 tab terminals With lead wires Short hinge roller lever With solder and #187 tab terminals With lead wires Hinge roller lever With solder and #187 tab terminals With lead wires Model D2VW-01L2A-1MS D2VW-01L2-1HS Model D2VW-5L2-1HS D2VW-5L2-1MSNote: The standard lengths of the lead wires (AWG20) of models incorporating them are 30 cm.
D2VW-01 Operating speed (see note 2) Operating frequency Insulation resistance Contact resistance Dielectric strength Inrush current Vibration resistance Shock resistance Life expectancy Ambient temperature Ambient humidity Enclosure rating Weight Malfunction Mechanical Electrical Operating Mechanical Electrical to 1 m/s (at pin plunger) 300 operations/min. 60 operations/min. 100 M min. (at 500 VDC) 100 m max. (initial value) 1,000 VAC, 50/60 Hz for 1 min. between contacts of the same polarity 1,500 VAC, 50/60 Hz for 1 min. between each terminal and ground to 55 Hz, 1.5 mm double amplitude 300 m/s2 min. (approx. g) 10,000,000 operations min. 1,000,000 operations min. 90� C (with no icing) 95% max. Reference to IP67 IEC 529 (lead wire type). Reference to IP50 (terminal type). 16 g (including lead wire) 100,000 operations min. 15 A max. D2VW-5
Note: 1. Data shown are of initial value. 2. The operating speed value shown is for pin plunger models. For hinge lever models, contact OMRON.
D2VW-5 Non-inductive load Resistive load Rated Voltage 125 VAC 250 VAC 30 VDC 125 VDC 250 VDC D2VW-01 Non-inductive load Resistive load Rated Voltage 125 VAC 30 VDC Note: NO NC Lamp load NO Inductive load NO NC Inductive load Motor load A NC Lamp load 0.2 A Inductive load NO NC Inductive load Motor load NO
The above current ratings are the values of the steady-state current. Inductive load has a power factor of 0.7 min. (AC) and a time constant 7 ms max. (DC). Lamp load has an inrush current of 10 times the steady-state current. Motor load has an inrush current of 6 times the steady-state current. Rating for UL/CSA approval is as follows: 0.1A, 125 VAC 0.1A, 30 VDC 3A 125 VAC, 250 VAC