HomedatasheetD3C-2210

D3C-2210 Datasheet

Subminiature Switch with Sliding Contacts <br> Built-in slide mechanism selects shorting or non-shorting switch timing. <br> 3 mm (0.12 in) long stroke. <br> PCB mount switch with 100 milliamp capacit
Share:
Manufacturer

Description

Features, Applications

Built-in slide mechanism selects shorting or non-shorting switch timing mm (0.12 in) long stroke PCB mount switch with 100 milliamp capacity Ideal for household appliances, sound equipment, office equipment, communications equipment, etc. Compact size RoHS Compliant

Actuator Model General Purpose Non-shorting Model Hinge lever D3C-1210 Shorting Model D3C-2210 Low Operating Force Non-shorting Model D3C-1220 Shorting Model D3C-2220

Specifications

Electrical rating Operating speed Operating frequency Contact resistance Insulation resistance Dielectric strength Vibration Shock Ambient temperature Humidity Service life Weight Note: Data shown are of initial value. Malfunction durability Malfunction durability Operating Mechanical Electrical A, 30 VDC (resistive load) to 500 mm/second to 19.7 in/second) 200 operations per minute 30 operations per minute 50 m max. 100 M min. at 250 VDC 250 VAC, 50/60 Hz for 1 minute between contacts of same polarity 250 VAC, 50/60 Hz for 1 minute between each terminal and ground to 55 Hz, 1.5 mm double amplitude 300 m/s2 minimum (approx. 30 g minimum) 80� C with no icing 65% max. 35�C 50,000 operations minimum at the rated switch frequency Approx. 0.3 g

Non-shorting Model Characteristics OF max. RF min. OP1 OP2 TTP FP max. g 3g Shorting Model g 3g

When mounting the D3C with screws, use M1.6 mounting screws with plain washers or spring washers. Tighten the screws to a torque 102 N.

Note: Unless otherwise specified, a tolerance 0.2 mm applies to all dimensions.

Refer to the following dimensions for PCB mounting. The distance between two adjacent terminals is 2.54 mm.

When soldering each terminal of the D3C, apply a soldering iron rated 30 W for no longer than three seconds. Do not impose any external force to the terminals for approximately one minute after the terminals are soldered. Make sure that the terminals of the D3C are insulated from one another and the ground. Do not allow the lever to be pressed beyond the TTP.


Features

Parameters

Download DataSheet PDF View and Download


Manufacturer information

OMRON CORPORATION
Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227