Saves Wiring Effort, Production Steps, and Time
Easy wiring ensured through the Quick-Connect Terminals External actuator mounts in either of two directions Horizontal layout of terminals saves mounting space Same internal mechanism as the OMRON SS Subminiature Snap Action Switch RoHS Compliant
Actuator Pin plunger Actuator mounting position Contact type SPST-NC SPST-NO Hinge lever High ratio operating position Standard operating position SPST-NC SPST-NO SPST-NC SPST-NO Model D3M-01L1 D3M-01L1-3High ratio operating position Standard operating position
Refer to Wiring under the Precautions section of this data sheet.
Permissible operating speed (see note 1) Permissible operating frequency Insulation resistance Contact resistance (initial value) Dielectric strength Between terminals of the same polarity Mechanical Electrical 0.1 mm/s to 1 m/s 400 operations/min max. 60 operations/min max. 100 M min. at 500 VDC 100 m max. including connector and 50-mm AWG28 lead wire resistance 1,000 VAC 50/60 Hz for 1 min
Between charged metal part 1,500 VAC 50/60 Hz for 1 min and ground Between non-charged metal 1,500 VAC 50/60 Hz for 1 min part and each terminal Vibration resistance Shock resistance Life expectancy Malfunction (See Note 2.) Destruction Malfunction (See Note 2.) Mechanical Electrical Enclosure rating Degree of protection against electric shock Proof tracking index (PTI) Ambient temperature Ambient humidity Weight Operating to 55 Hz, 1.5-mm double amplitude for 1 ms max. with contacts closed or open. 1,000 m/s2 (approx. 300 m/s2 (approx. 30G) for 1 ms max. with contacts closed or open. 500,000 operations (at full-stroke operating speed of 10 mm/s at a frequency of 60 operations/min) 200,000 operations (at full-stroke operating speed of 10 mm/s at a frequency of 30 operations/min) IP00 Class to 85�C (with no icing) 85% max. Approx. 2 g (pin plunger model)
Note: 1. The permissible operating speed applies to pin plunger models. If a lever actuator model is used, the above vibration resistance conditions will apply when the actuator is in the maximum over-travel position.
Characteristics Part number D3M-01 D3M-01-3 Max. operating force (OF) 153 gf Min. reset force (RF) Min. pretravel (PT) Min. overtravel (OT) Max. movement differential (MD) Max. free position (FP) Operating position (OP) 11.3�0.6 mm
Note: 1. A tolerance �0.4 mm applies to all of the above dimensions unless otherwise specified. 2. The operating characteristics apply when each actuator is moved in the direction indicated by the arrow and "A."Rated voltage 30 VDC Use the D3M in the following permissible operating range. 0.1 A Resistive load
Minimum Applicable Load (Level N) Voltage 5 VDC Refer to Minimum Load under the Precautions section of this data sheet. 1 mA Resistive load
Use M2.3 screws, flat washers, and spring washers to mount the D3M securely. Make sure that the tightening torque applied to each screw is within a range from to 2.7 kgf cm.