Description: The D64BP Series of small 2-pole-pair fixedfrequency, precision band-pass active filter that provides high performance in a compact 32-pin DIP package, with a broad range of fixed center frequencies (fo) from to 100 kHz. Each filter type features a near theoretical amplitude/phase response along with low output voltage noise enabling these filters to achieve 10,000:1 or better dynamic signal range. Pretuned to within �2% of the fixed, user specified center frequency, band-pass D64BP filters pass all frequencies lying between the upper and lower -3dB points of the amplitude response curve. Available Q's for D64BP models are or 10.
Features/Benefits: Compact x 0.3"H minimizes board space requirements. Plug-in ready-to-use, reducing engineering design and manufacturing cycle time. Factory tuned, no external clocks or adjustments needed. Broad range of center frequencies to meet a wide range of applications. Applications Power line interference rejection Transducer output filtering Production test instrumentation Medical electronics equipment and research Comb filtering and equalization Noise and harmonic analysis RMS measurements Frequency spectrum analysis
Available Band-Pass Models:.Page D64BP2 2 pole pair.2 General Specifications: Ordering Information.3 Pin-Out/Package Data.3
25 Locust St, Haverhill, Massachusetts 01830 Tel: 800/252-7074, 978/374-0761 FAX: 978/521-1839 e-mail: email@example.com Web Address: http://www.freqdev.com
Model Product Specifications Size Range fo Available "Q's"1 "Q" Accuracy Theoretical Transfer Characteristics Pass-Band GainAttenuation Rate Center Frequency Stability Filter Mounting Assembly
Analog Input Characteristics1 Impedance Voltage Range Max. Safe Voltage Analog Output Characteristics Impedance (Closed Loop) Linear Operating Range 2 Maximum Current 3 Offset Voltage Offset Temp. Coeff. Power Supply (�V) Rated Voltage Operating Range Maximum Safe Voltage Quiescent Current Temperature Operating Storage 10 k min. � 10 Vpeak �Vs 11 typ. 10 max. 22 mV typ. 20 mV max. 50 �V/�C
Notes: 1. Input and output signal voltage referenced to supply common. 2. Output is short circuit protected to common. DO NOT CONNECT TO �Vs. 3. Adjustable to zero. 4. Units operate with or with out offset pin connected. 5. How to Specify Center Frequency: Center frequencies are specified by attaching a three digit frequency designator to the basic model number. Center frequencies can range from to 100 kHz.
We hope the information given here will be helpful. The information is based on data and our best knowledge, and we consider the information to be true and accurate. Please read all statements, recommendations or suggestions herein in conjunction with our conditions of sale which apply to all goods supplied by us. We assume no responsibility for the use of these statements, recommendations or suggestions, nor do we intend them as a recommendation for any use which would infringe any patent or copyright. IN-D64BP-02