HomedatasheetDAC2813AP

DAC2813AP Datasheet

ti DAC2813, Dual 12-Bit Digital-to-analog Converter (12-Bit Port Interface)
Share:
Manufacturer

Description

Features, Applications

FEATURES

q COMPLETE WITH REFERENCE AND OUTPUT AMPLIFIERS q 12-BIT PORT INTERFACE q ANALOG OUTPUT RANGE: �10V q MONOTONICITY GUARANTEED OVER TEMPERATURE q INTEGRAL LINEARITY ERROR: �1/2LSB max to �15V SUPPLIES q 28-PIN PLASTIC DIP PACKAGE

DESCRIPTION

is a complete dual 12-bit digital-to-analog converter with bus interface logic. Each package includes a precision +10V voltage reference, doublebuffered bus interface including a RESET function and 12-bit D/A converters with voltage-output operational amplifiers. The double-buffered interface consists a 12-bit input latch and a D/A latch for each D/A converter. A RESET control allows the D/A outputs to be asynchronously reset to bipolar zero, a feature useful for power-up reset, system initialization and recalibration. DAC2813 output range resistors are internally connected for 20V full scale range. to 10V range can be connected using the bipolar offset resistor. Gain and bipolar offset of each D/A are adjustable with external trim potentiometers. DAC2813 is available in one performance grade with a integral linearity error of 1/2LSB and 12-bit monotonicity guaranteed over temperature. It is packaged 28-pin 0.6in. wide plastic DIP package and specified over to +85oC.

International Airport Industrial Park Mailing Address: PO Box 11400, Tucson, AZ 85734 Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 Tel: (520) 746-1111 Twx: 910-952-1111 Internet: http://www.burr-brown.com/ FAXLine: (800) 548-6133 (US/Canada Only) Cable: BBRCORP Telex: 066-6491 FAX: (520) 889-1510 Immediate Product Info: (800) 548-6132

SPECIFICATIONS

= +25oC, +VCC or +15V, �VCC or �15V, unless otherwise noted. PARAMETER INPUTS DIGITAL INPUTS Input Code (1) Logic Levels (2) VIH VIL Logic Input Currents DB0-DB11, WR, LDAC, RESET,ENX IIH IIL TRANSFER CHARACTERISTICS ACCURACY Linearity Error Differential Linearity Error Gain Error (5,6) Bipolar Zero Error (5,7) Power Supply Sensitivity Of Full Scale +VCC �VCC DRIFT Gain Bipolar Zero Drift Linearity Error over Temperature Monotonicity DYNAMIC CHARACTERISTICS SETTLING TIME (8) To within �0.012%FSR of Final Value 5k 500pF Load 20V Range Over Specification Temperature Range �5 �1/2 Guaranteed �15 �3/4 ppm/�C ppmFSR/�C LSB % %FSR(4) ppmFSR/%+VCC ppmFSR/%�VCC Over Temperature Range +2 0 Bipolar Offset Binary +0.8 V CONDITIONS MIN DAC2813AP TYP MAX UNITS

Full Scale Range Change 1LSB Output Step (9) At Major Carry Slew Rate Crosstalk (10) OUTPUT Output Voltage Range Output Current Output Impedance Short Circuit to ACOM Duration REFERENCE VOLTAGE Voltage Source Current Available for External Loads Impedance Temperature Coefficient Short Circuit to Common Duration POWER SUPPLY REQUIREMENTS Voltage:+VCC �VCC Current: +VCC �VCC Power Dissipation Potential at DCOM with Respect to ACOM (11) TEMPERATURE RANGES Specification Storage Thermal Resistance, JA,Plastic DIP

NOTES: (1) For Two's Complement Input Coding invert the MSB with an external logic inverter. (2) Digital inputs are TTL and +5V CMOS compatible over the specification temperature range. (3) Open DATA input lines will be pulled above +5.5V. See discussion under LOGIC INPUT COMPATIBILITY section. (4) FSR means Full Scale Range. For example, for �10V output, FSR 20V. (5) Adjustable to zero with external trim potentiometer. (6) Specified with 500 connected between VREF OUT and VREF IN. (7) Error at input code 800HEX. DAC2813 specified with 100 connected betweenVREF OUT and VREF IN; and with 500 connected between VREF OUT and BPO. (8) Maximum represents the 3 limit. Not 100% tested for this parameter. (9) For the worst-case code change: 7FF HEX to 800 HEX and 800 HEX to 7FF HEX. (10) Crosstalk is defined as the change in any output as a result of any other output being driven from +10V at rated output current. (11) The maximum voltage at which ACOM and DCOM may be separated without affecting accuracy specifications.

+VCC to ACOM............................................................................ to +18V �VCC to ACOM............................................................................ to �18V +VCC to �VCC............................................................................... to +36V ACOM to DCOM.................................................................................. �4V Digital Inputs to DCOM........................................................... �1V to +VCC External Voltage applied to BPO Resistor......................................... �18V VREF OUT.............................................................. Indefinite short to ACOM VOUT............................................................................ Momentary to �18V Lead Temperature, soldering 10s.................................................. +300oC Max Junction Temperature.............................................................. 165oC NOTE: (1) Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. Exposure to absolute maximum conditions for extended periods may affect device reliability. PRODUCT

Electrostatic discharge can cause damage ranging from performance degradation to complete device failure. Burr-Brown Corporation recommends that all integrated circuits be handled and stored using appropriate ESD protection methods. PACKAGE/ORDERING INFORMATION

NOTE: (1) For detailed drawing and dimension table, please see end of data sheet, or Appendix C of Burr-Brown IC Data Book.

21 VREF OUT NOTE: RESET does not reset input latches.

Features

Parameters


Manufacturer information

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
Request for Datasheet

  • Part No     :
  • Your Email:
  • Content     :

related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227