HomedatasheetDAC2815DK

DAC2815DK Datasheet

12V, 6W Dual DC-DC Converter
Share:
Manufacturer

Description

Features, Applications

HI-REL DESIGN WAVE SOLDERABLE PACKAGE ALL CERAMIC CAPACITORS SURFACE MOUNT MAGNETICS

FEATURES DUAL OUTPUT REPLACES APEX & DHC2815D BOTH OUTPUTS FULLY REGULATED NO DERATING TO +125�C HIGH ISOLATION 500V TRACKING OUPUT V ADJUSTMENT STANDARD REMOTE SHUTDOWN TO 50V INPUT WITH 5 WATT OUTPUT AVAILABLE WITH OR �15V OUTPUTS

DESCRIPTION

The DAC2800D series of DC-DC converters provides the ruggedness reliability and features required to meet the advanced design challenges of today's hi-rel market. This has been accomplished while retaining a power density W/ in3 and 375 mW/gram of power/package performance. The use of advanced substrate and reflow soldering techniques during construction results in a rugged, cost-effective, and completely solderable package. The DAC2800D hybrid converter series utilizes all ceramic capacitors, surface mount magnetics, and ultrasonically bonded wires to provide reliable operation at all operating temperatures while surviving G forces 500 G. The DAC2800D series has two fully regulated tracking outputs. Standard features include output fault monitoring and/or turn on voltage point programming via the shutdown pin. All three functions may be implemented simultaneously with a minimum of external components. An output voltage adjustment / load compensation pin which adjusts both outputs simultaneously is also standard. Fault tolerant design protects these converters from most external circuit faults. The +output and output adjust pins will withstand +25 V while the shutdown pin will withstand +50 V, protecting the converters from a variety of system or board faults e.g. solder bridges etc. Unique load fault protection circuitry allows this converter to pull up loads having difficult static load line characteristics and allows short term load excursions significantly beyond ratings in most applications. A transformer isolated flyback converter topology operating at a switching frequency of 400 kHz allows operation over a wide input voltage range. Internal filtering of outputs eliminates the need for external capacitors in many applications. The 8-pin DIP package is hermetically sealed and isolated from the internal circuits. Heat sinking is recommended for full power operation at elevated ambient temperatures. 1

+OUTPUT OUTPUT COMMON -OUTPUT ADJUST/COMP SHUTDOWN PLUS 7 6 CASE -INPUT +INPUT

INPUT VOLTAGE RANGE (Pin or 5) INPUT TRANSIENT (Pin to 6) OUTPUT CURRENT (Continuous) TEMPERATURE, Storage TEMPERATURE, Pin Soldering 10s

SPECIFICATIONS

PARAMETER STEADY STATE CHARACTERISTICS INPUT VOLTAGE RANGE OUTPUT VOLTAGE OUTPUT CURRENT � 125�C OUTPUT POWER � 125�C EFFICIENCY LINE REGULATION LOAD REGULATION + (+Io= (-Io= � 160%) OPERATING TEMPERATURE, CASE TEMPERATURE COEFFICIENT (Vout INPUT RIPPLE CURRENT WITH 1�H SERIES INDUCTANCE OUTPUT RIPPLE VOLTAGE LOAD CAPACITANCE3 (PER OUTPUT OVER � 125�C) SHORT CIRCUIT DISSIPATION QUIESCENT INPUT CURRENT INHIBITED ISOLATION CHARACTERISTICS (INPUT/OUTPUT/CASE) LEAKAGE RESISTANCE LEAKAGE CAPACITANCE DYNAMIC CHARACTERISTICS LINE STEP RESPONSE VOLTAGE CHANGE RECOVERY TIME (99%) WITH 50 �F OUTPUT CAPACITORS3 VOLTAGE CHANGE RECOVERY TIME (99%) LOAD STEP RESPONSE VOLTAGE CHANGE RECOVERY TIME (99%) WITH 50 �F OUTPUT CAPACITORS3 VOLTAGE CHANGE RECOVERY TIME (99%) START-UP OVERSHOOT SHUTDOWN DELAY SHUTDOWN RECOVERY 500 Vdc �55�C 125�C +Io = �Io = 10% VIN 16 40 VIN 11 50 VIN 16 40 VIN 11 50 +Io = �Io= 100% VIN 11 50; +Io = �Io = 100% �Io = 40%2 +Io TEST CONDITIONS1 MIN


Unless otherwise stated = 25�, VIN = 28V, �Io= +Io= 100%, Regulation measured on output pins 1/16" from case. Io= 100% means or 2.7 watts. Capacitors should be connected from + to common and � to common only. Capacitance value imbalance should not be more than 80% of total load may be drawn from either output.

PACKAGE & THERMAL SPECIFICATIONS WEIGHT TEMPERATURE RISE, junction to case TEMPERATURE RISE, ambient


Features

Parameters


Manufacturer information

M.S. KENNEDY
Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
Request for Datasheet

  • Part No     :
  • Your Email:
  • Content     :

related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227