FEATURES Compact SO-8 and TSSOP Packages True 12-Bit Accuracy 5 V Operation <10 A Fast 3-Wire Serial Input Fast 1 s Settling Time 2.4 MHz 4-Quadrant Multiply BW Pin-for-Pin Upgrade for DAC8043 Standard and Rotated Pinout APPLICATIONS Ideal for PLC Applications in Industrial Control Programmable Amplifiers and Attenuators Digitally Controlled Calibration and Filters Motion Control Systems
The is an improved high accuracy 12-bit multiplying digital-to-analog converter in space-saving 8-lead packages. Featuring serial input, double buffering and excellent analog performance, the DAC8043A is ideal for applications where PC board space at a premium. Improved linearity and gain error performance permit reduced parts count through the elimination of trimming components. Separate input clock and load DAC control lines allow full user control of data loading and analog output. The circuit consists a 12-bit serial-in/parallel-out shift register, a 12-bit DAC register, a 12-bit CMOS DAC and control logic. Serial data is clocked into the input register on the rising edge of the CLOCK pulse. When the new data word has been clocked in, it is loaded into the DAC register with the LD input pin. Data in the DAC register is converted to an output current by the D/A converter. Consuming only 10 �A from a single 5 V power supply, the DAC8043A is the ideal low power, small size, high performance solution to many application problems. The DAC8043A is specified over the extended industrial to +85�C) temperature range. DAC8043A is available in plastic DIP, and the low profile 1.75 mm height SO-8 surface mount packages. The DAC8043AFRU is available for ultracompact applications in a thin mm TSSOP-8 package.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 World Wide Web Site: http://www.analog.com Fax: 781/326-8703 � Analog Devices, Inc., 2000
Parameter STATIC PERFORMANCE Resolution Relative Accuracy Differential Nonlinearity Gain Error1 Gain Tempco2 Output Leakage Current Zero-Scale Error3 REFERENCE INPUT Input Resistance Input Capacitance2 ANALOG OUTPUT Output Capacitance2 DIGITAL INPUTS Digital Input Low Digital Input High Input Leakage Current Input Capacitance2 INTERFACE TIMING 2, 4 Data Setup Data Hold Clock Width High Clock Width Low Load Pulsewidth LSB CLK to LD DAC AC CHARACTERISTICS 1, 2 Output Current Settling Time DAC Glitch Feedthrough (VOUT/VREF) Total Harmonic Distortion Output Noise Density5 Multiplying Bandwidth SUPPLY CHARACTERISTICS Power Supply Range Positive Supply Current Power Dissipation Power Supply Sensitivity Symbol N INL DNL GFSE TCGFS ILKG IZSE
E Grade F Grade Unit Bits LSB max LSB max LSB max LSB max ppm/�C max nA max nA max LSB max LSB max k min/max pF typ pF typ pF typ V max V min �A typ/max pF max ns min ns min ns min ns min ns min ns min �s max nVs max mV p-p dB typ nV/Hz max MHz typ V min/max �A max �W max
� 0.5 All Grades Monotonic to 12 Bits = 25�C, Data = FFFH �40�C, +85�C, Data = FFFH IOUT Pin Measured �5 Data = 000H, IOUT Pin Measured �40�C, +85�C, Data = 000H, IOUT Pin Measured � 25 Data �40�C, +85�C, Data 000H 0.15 Absolute Tempco < 50 ppm/ 0.01% of Full Scale, Ext Op Amp OP42 Data 000H to FFFH to 000H, VREF 0 V VREF 20 V p-p, Data = 10 kHz VREF 6 V rms, Data = FFFH, = 1 kHz to 100 kHz Between R FB and IOUT �3 dB, VOUT/VREF, VREF 100 mV rms, Data = FFFH
NOTES 1 Using internal feedback resistor R FB, see Figure 19 test circuit with V REF V. 2 These parameters are guaranteed by design and not subject to production testing. 3 Calculated from worst case R REF: IZSE(LSB) = (R REF � ILKG 4096)/VREF. 4 All input control signals are specified with 5 V) and timed from a voltage level V. 5 Calculation from = 4KTRB where: K = Boltzmann Constant (J/ �K), R = Resistance T = Resistor Temperature ( �K), 1 Hz Bandwidth. Specifications subject to change without notice.
VDD to GND. +8 V VREF to GND. 18 V RFB to GND. 18 V Logic Inputs to GND. �0.3 V, VDD 0.3 V VIOUT to GND. �0.3 V, VDD 0.3 V IOUT Short Circuit to GND. 50 mA Package Power Dissipation. (TJ max � TA)/JA Thermal Resistance JA 8-Lead Plastic DIP Package 103�C/W 8-Lead SOIC Package 158�C/W TSSOP-8 Package (RU-8). 240�C/W Maximum Junction Temperature (TJ max). 150�C Operating Temperature Range. to +85�C Storage Temperature Range. to +150�C Lead Temperature (Soldering, 10 sec). 300�C
*Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Name Function 1(7) VREF DAC Reference Input Pin. Establishes DAC fullscale voltage. Constant input resistance versus code. Internal Matching Feedback Resistor. Connect to external op amp output. DAC Current Output, full-scale output 1 LSB less than reference input voltage �VREF. Analog and Digital Ground. Load Strobe, Level-Sensitive Digital Input. Transfers shift-register data to DAC register while active low. See truth table for operation. 12-Bit Serial Register Input, data loads directly into the shift register MSB first. Extra leading bits are ignored. Clock Input, positive-edge clocks data into shift register. Positive Power Supply Input. Specified range of operation � 10%.
ORDERING GUIDE INL (LSB) Temp �40/+85�C Package Description 8-Lead P-DIP 8-Lead SOIC 8-Lead SOIC 8-Lead P-DIP 8-Lead SOIC 8-Lead SOIC* TSSOP-8 Package Option SO-8 RU-8
*Note Pin numbers in parenthesis represent the rotated pinout of the DAC8043A1ES and DAC8043A1FS models.
NOTES The DAC8043A contains 346 transistors. The die size measures 70.3 mil � 57.1 mil, 4014 sq mil. *The DAC8043A1ES and DAC8043A1FS have a rotated pinout. TSSOP-8 Package Branding: Line 1: yww (data code: year, work week). Line 2: 8043A.
CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the DAC8043A features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.