HomedatasheetDG407CJ

DG407CJ Datasheet

Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers <br> Maxim\'s redesigned DG406 and DG407 CMOS analog multiplexers now feature guaranteed matching between channels (8? max) and flatness o
Share:
Manufacturer

Description

Features, Applications

Maxim's redesigned DG406 and DG407 CMOS analog multiplexers now feature guaranteed matching between channels (8, max) and flatness over the specified signal range (9, max). These low on-resistance muxes (100, max) conduct equally well in either direction and feature guaranteed low charge injection (15pC, max). In addition, these new muxes offer low input off-leakage current over temperature--less than at +85�C. The of 16 multiplexer/demultiplexer and the is a dual 8-channel multiplexer/demultiplexer. Both muxes operate with to +30V single supply and with to �20V dual supplies. ESD protection is guaranteed to be greater than 2000V per Method 3015.7 of MIL-STD 883. These improved muxes are pin-compatible plug-in upgrades for the industry standard DG406 and DG407.

Pin-Compatible Plug-In Upgrade for Industry Standard DG406/DG407 Guaranteed Matching Between Channels, 8 (max) Guaranteed On-Resistance Flatness, 9 (max) Guaranteed Low Charge Injection, 15pC (max) Low On-Resistance 100 (max) Input Leakage, 5nA (max) at +85�C Low Power Consumption, 1.25mW (max) Rail-to-Rail Signal Handling Digital Input Controls TTL/CMOS Compatible ESD Protection >2000V per Method 3015.7

PART DG406AK+ DG406EUI+ TEMP RANGE to +85�C PIN-PACKAGE 28 Plastic DIP 28 Wide SO Dice* 28 Plastic DIP 28 Wide SO 28 PLCC 28 CERDIP 28 TSSOP

Sample-and-Hold Circuits Test Equipment Guidance and Control Systems Communications Systems Data-Acquisition Systems Audio Signal Routing

Ordering Information continued at end of data sheet. *Contact factory for dice specifications. +Denotes a lead(Pb)-free/RoHS-compliant package.

For pricing, delivery, and ordering information, please contact Maxim Direct 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.

(Voltage Referenced to V-) GND.........................................................................-0.3V, 25V Digital Inputs, S, D (Note 2V) to (V+ or 30mA (whichever occurs first) Continuous Current (any terminal)......................................30mA Peak Current, or D (pulsed 1ms, 10% duty cycle max)..........................100mA Continuous Power Dissipation (TA +70�C) 28-Pin Plastic DIP (derate 9.09mW/�C above +70�C)..727mW 28-Pin Wide SO (derate 12.50mW/�C above +70�C)...1000mW 28-Pin PLCC (derate 10.53mW/�C above +70�C)........842mW Note 1: 28-Pin CERDIP (derate 16.67mW/�C above +70�C)...1333mW 28-Pin TSSOP (derate 12.8mW/�C above +70�C)......1025mW Operating Temperature Ranges to +125�C Storage Temperature to +150�C Lead Temperature (excluding dice; soldering, 10s).......+300�C Soldering Temperature (reflow) Plastic DIP, Wide SO, TSSOP......................................+260�C PLCC............................................................................+245�C CERDIP, Dice...............................................................+240�C

Signals on S_, D_, or EN exceeding or V- are clamped by internal diodes. Limit forward current to maximum current ratings.

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

(V+ = -15V, VGND = 0V, VAH = +2.4V, VAL TA = TMIN to TMAX, unless otherwise noted.) PARAMETER SWITCH Analog Signal Range Drain-Source On-Resistance Matching Between Channels On-Resistance Flatness Source-Off Leakage Current (Note 5) VANALOG RDS(ON) RFLAT (Note = �10V (Note = �10V, VEN = +10V, VEN = 0V ID(OFF) = �10V, VEN TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX = +25�C Drain-On Leakage Current (Note 5) ID(ON) + IS(ON) = �10V, sequence each switch TA = TMIN to TMAX TA = TMIN to TMAX nA V SYMBOL CONDITIONS MIN TYP MAX (Note 2) UNITS

(V+ = -15V, VGND = 0V, VAH = +2.4V, VAL TA = TMIN to TMAX, unless otherwise noted.) PARAMETER INPUT Input Current with Input Voltage High Input Current with Input Voltage Low SUPPLY Power-Supply Range VEN or 5.0V Positive Supply Current I+ VEN = 2.4V, VA(ALL) = 0V VEN = 2.4V, VA(ALL) TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX = +25�C IAH IAL or 15V VEN 0V �A SYMBOL CONDITIONS MIN TYP MAX (Note 2) UNITS

Negative Supply Current DYNAMIC Transition Time Break-Before-Make Interval Enable Turn-On Time Enable Turn-Off Time Charge Injection (Note 3) Off-Isolation (Note 6)

Figure 2 Figure 4 Figure 3 Figure = 0, Figure 5 VEN = 100kHz, Figure 6 VEN = 100kHz, VGEN = 1k, Figure = 1MHz, VEN = 0V, Figure = 1MHz, VEN = 0V, Figure = 1MHz, VEN = 0V, Figure 8 DG406


Features

Parameters

Download DataSheet PDF View and Download


Manufacturer information

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227