HomedatasheetDG411FEUE

DG411FEUE Datasheet

DG411F, DG412F, DG413F Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches
Share:
Manufacturer

Description

Features, Applications

Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches

The DG411F/DG412F/DG413F are quad, single-pole/single-throw (SPST), fault-protected analog switches. They are pin compatible with the industry-standard nonprotected DG411/DG412/DG413. These new switches feature fault-protected inputs and Rail-to-Rail signalhandling capability. All terminals are protected from overvoltage faults to �36V with power on and to �40V with power off. During a fault condition, the COM, NO, or NC terminal becomes an open circuit and only microamperes of leakage current flow from the source. On-resistance is 35 (max) and is matched between switches to 1.5 (max) at +25�C. The DG411F has four normally closed (NC) switches. The DG412F has four normally open (NO) switches. The DG413F has two NC and two NO switches. These CMOS switches operate with dual power supplies ranging from or a single supply between +9V and +36V. All digital inputs have +0.8V and +2.4V logic thresholds, ensuring both TTL and CMOS logic compatibility when using or a single +12V supply. For supply voltages �5V, +5V, and +3V, refer to the MAX4711/MAX4712/MAX4713 data sheet. o Rail-to-Rail Signal Handling o All Switches Off with Power Off o All Switches Off when V+ is Off and o �40V Fault Protection with Power Off o �36V Fault Protection with �15V Supplies o Control Line Fault Protection from 40V o Pin Compatible with Industry-Standard o 20ns (typ) Fault Response Time o 35 (max) RON with �15V Supplies to �20V Dual Supplies to +36V Single Supply o TTL- and CMOS-Compatible Logic Inputs with �15V or Single to +15V Supplies

Features
Applications

Communication Systems Signal Routing Test Equipment Data Acquisition Industrial and Process Control Systems Avionics Redundant/Backup Systems

PART DG411FDY DG411FDJ TEMP RANGE to +85�C PIN-PACKAGE 16 TSSOP SO 16 Plastic DIP

Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd. Functional Diagram appears at end of data sheet. Pin Configurations continued at end of data sheet.

N.C. = NOT CONNECTED. SWITCHES SHOWN FOR LOGIC 0 INPUT. ALL SWITCHES ARE OFF WITH POWER REMOVED.

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.

Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches DG411F/DG412F/DG413F

(Voltages Referenced to GND) to +44V IN_......................................................... (V- 0.3V) to (V- + 40V) NO_, NC_ to COM_ to +40V COM_, NO_, NC_ Voltage with Power On (Note to +36V COM_, NO_, NC_ Voltage with Power Off (Note to +40V Continuous Current (any terminal).................................. �30mA Peak Current COM_, NO_, NC_ (pulsed 1ms, 10% duty cycle)...............................�100mA Continuous Power Dissipation (TA +70�C) 16-Pin TSSOP (derate 9.4mW/�C above 16-Pin SO (derate 8.7mW/�C above +70�C)................696mW 16-Pin Plastic DIP (derate 10.53mW/�C above +70�C)........................................................ 842mW Operating Temperature Range.......................... to +85�C Junction Temperature.................................................... +150�C Storage Temperature Range........................... to +160�C Lead Temperature (soldering, 10s)............................... +300�C

Note 1: COM_, NO_, and NC_ pins are fault protected. Signals on COM_, NO_, and NC_ exceeding to +36V may damage the device during power-on conditions. When the power is off, the maximum range to +40V.

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

(V+ = -15V, VIH = +2.4V, VIL = +0.8V, GND TA = TMIN to TMAX, unless otherwise noted. Typical values are = +25�C.) (Notes 2, 3)

PARAMETER ANALOG SWITCH Fault-Free Analog Signal Range On-Resistance Match Between Channels (Note 4) On-Resistance Flatness NO_, NC_ Off-Leakage Current (Note 5) COM_ Off-Leakage Current (Note 5) COM_ On-Leakage Current (Note 5) FAULT = -15V Fault-Protected Analog Signal Range NO_ or NC_ Off-Leakage Current COM_ Off-Leakage Current VCOM_, VNO_, VNC_ INO_, INC_ ICOM_ = 0 VNO_, VNC_ = �36V VCOM_ �A V VCOM_, VNO_, VNC_ RON RFLAT(ON) INO_(OFF), INC_(OFF) ICOM_(OFF) ICOM_(ON) ICOM_ = 10mA, VNO_, VNC_ = �10V ICOM_ = 10mA, VNO_, VNC_ = �10V ICOM_ = 10mA, VNO_, VNC_ �5V, 0 VCOM_ = �10V, VNO_, VNC_ > 10V VCOM_ = �10V, VNO_, VNC_ > 10V VCOM_ = �10V, VNO_, VNC_ �10V or floating V nA SYMBOL CONDITIONS TA MIN TYP MAX UNITS

(V+ = -15V, VIH = +2.4V, VIL = +0.8V, GND TA = TMIN to TMAX, unless otherwise noted. Typical values are = +25�C.) (Notes 2, 3)

PARAMETER NO_ or NC_ Leakage Current COM_ Leakage Current NO_ or NC_ Off-Leakage Current COM_ Off-Leakage Current Fault-Trip Threshold � Fault Output Turn-Off Delay � Fault Recovery Time SWITCH DYNAMICS Turn-On Time Turn-Off Time Break-Before-Make Time Delay (DG413F only) (Note 6) Charge Injection NO_ or NC_ Off-Capacitance COM_ Off-Capacitance COM_ On-Capacitance Off-Isolation (Note 7) Channel-to-Channel Crosstalk (Note 8) LOGIC INPUT Input Logic High Input Logic Low Input Leakage Current POWER SUPPLY Power-Supply Range V+, VAll VIN_ = +5V, VCOM_ 0 V+ Supply Current I+ All VIN_ 0 or V+, VCOM_ �A V VIH VIL IIN VIN_ V+ �A tON tOFF tBBM Q CN_(OFF) CCOM_(ON) VISO VCT VNO_ or VNC_ = 35pF, Figure 2 E VNO_ or VNC_ = 35pF, Figure 2 E VNO_ or VNC_ = 10pF, Figure 3 E VGEN = 0, RGEN = 1nF, Figure = 1MHz, Figure = 1MHz, Figure = 15pF, PIN = 0dBm, Figure = 15pF, PIN = 0dBm, Figure pF dB SYMBOL INO_, INC_ ICOM_ INO_, INC_ ICOM_ CONDITIONS VNO_, VNC_ = 0 VCOM_ = -15V, VNO_, VNC_ = -15V, VCOM_ = �36V VNO_, VNC_ = 1k VNO_, VNC_ TA +25�C MIN V- TYP MAX + 0.4 UNITS ns �s


Features

Parameters

Download DataSheet PDF View and Download


Manufacturer information

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227