HomedatasheetDG445DJ

DG445DJ Datasheet

SPST
Share:
Manufacturer

Description

Features, Applications

Monolithic, Quad SPST, CMOS Analog Switches

The DG444 and DG445 monolithic CMOS analog switches are drop-in replacements for the popular DG211 and DG212 series devices. They include four independent single pole single throw (SPST) analog switches and TTL and CMOS compatible digital inputs. These switches feature lower analog ON resistance (<85) and faster switch time (tON <250ns) compared to the DG211 and DG212. Charge injection has been reduced, simplifying sample and hold applications. The improvements in the DG444 series are made possible by using a high voltage silicon-gate process. An epitaxial layer prevents the latch-up associated with older CMOS technologies. The 44V maximum voltage range permits controlling �20V signals when operating with �20V power supplies. The four switches are bilateral, equally matched for AC or bidirectional signals. The ON resistance variation with analog signals is quite low over a �5V analog input range. The switches in the DG444 and DG445 are identical, differing only in the polarity of the selection logic.

Features

ON Resistance (Max). 85 Low Power Consumption (PD). <35�W Fast Switching Action - tON (Max). 250ns - tOFF (Max, DG444). 140ns Low Charge Injection Upgrade from DG211/DG212 TTL, CMOS Compatible Single or Split Supply Operation

Applications

Audio Switching Battery Operated Systems Data Acquisition Hi-Rel Systems Sample and Hold Circuits Communication Systems Automatic Test Equipment

PART NUMBER DG445DJ DG445DY TEMP. RANGE ( oC) to 85 PACKAGE 16 Ld PDIP 16 Ld SOIC 16 Ld PDIP 16 Ld SOIC PKG. NO. E16.3 M16.15

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc. Copyright � Intersil Americas Inc. 2002. All Rights Reserved

DESCRIPTION Logic Control for Switch 1 Drain (Output) Terminal for Switch 1 Source (Input) Terminal for Switch 1 Negative Power Supply Terminal Ground Terminal (Logic Common) Source (Input) Terminal for Switch 4 Drain (Output) Terminal for Switch 4 Logic Control for Switch 4 Logic Control for Switch 3 Drain (Output) Terminal for Switch 3 Source (Input) Terminal for Switch 3 Logic Reference Voltage. Positive Power Supply Terminal (Substrate) Source (Input) Terminal for Switch 2 Drain (Output) Terminal for Switch 2 Logic Control for Switch 2

V+ to V-. 44V GND to V-. 25V VL. (GND 0.3V) to (V+) + 0.3V Digital Inputs, , VD (Note 1). (V-) -2V to (V+) or 30mA, Whichever Occurs First Continuous Current (Any Terminal). 30mA Peak Current, or D (Pulsed 1ms, 10% Duty Cycle Max). 100mA

PDIP Package. 90 SOIC Package. 115 Maximum Junction Temperature (Plastic Packages). 150oC Maximum Storage Temperature Range. to 150oC Maximum Lead Temperature (Soldering 10s). 300oC (SOIC - Lead Tips Only)

Temperature Range. to 85oC Voltage Range. �20V (Max) Temperature Range. to 125oC Input Low Voltage. 0.8V (Max) Input High Voltage. 2.4V (Min) Input Rise and Fall Time. 20ns

CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

NOTES: 1. Signals IN X exceeding or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings. JA is measured with the component mounted on an evaluation PC board in free air.

Test Conditions: = 5V, VIN 2.4V, 0.8V (Note 3), Unless Otherwise Specified TEST CONDITIONS TEMP (oC) (NOTE 4) MIN (NOTE 5) TYP (NOTE 4) MAX UNITS

PARAMETER DYNAMIC CHARACTERISTICS Turn-ON Time, tON Turn-OFF Time, tOFF DG444 DG445 Charge Injection, Q (Figure 2) OFF Isolation (Figure 4) Crosstalk (Channel-to-Channel) (Figure 3) Source OFF Capacitance, CS(OFF) Drain OFF Capacitance, CD(OFF) Channel ON Capacitance, C D(ON) + CS(ON) DIGITAL INPUT CHARACTERISTICS Input Current VIN Low, IIL Input Current VIN High, IIH ANALOG SWITCH CHARACTERISTICS Analog Signal Range, VANALOG Drain-Source ON Resistance, r DS(ON) Source OFF Leakage Current, IS(OFF)

VIN Under Test = 0.8V, All Others = 2.4V VIN Under Test = 2.4V, All Others = 0.8V

Features

Parameters


Manufacturer information

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
Request for Datasheet

  • Part No     :
  • Your Email:
  • Content     :

related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227