Home datasheet DG507AAZ/883B

DG507AAZ/883B

Monolithic CMOS Analog Multiplexers <br> Maxim\'s DG506A/DG507A are monolithic CMOS analog multiplexers. The DG506A is a single 16-channel (1 of 16) multiplexer and the DG507A is a differential 8-chan
Share:
Manufacturer

Description

Features, Applications

Maxim's DG506A/DG507A are monolithic CMOS analog multiplexers. The is a single of 16) multiplexer and the is a differential of 16) multiplexer. Both devices feature break-before-make switching. Maxim guarantees that these multiplexers will not latchup if the power supplies are turned off with the input signals still present as long as absolute maximum ratings are not violated. The multiplexers operate over a wide range of power supplies from to Q18V. Compared to the original manufacturer's devices, Maxim's DG506A/DG507A consume significantly less power, making them ideal for portable equipment. Maxim's DG506A/DG507A meet or exceed the specifications of, and are drop-in replacements for Intersil's IH6116 and IH6216, Siliconix's DG506A and DG507A, and Harris' HI506 and HI507.

S Improved 2nd Source S Pin Compatible with Harris, Siliconix, Intersil S Operable with to �18V Supplies S Symmetrical, Bidirectional Operation S Logic and Enable Inputs, TTL and CMOS Compatible S Latch-Up Proof Construction S Monolithic, Low-Power CMOS Design

Features

PART DG507ACK DG507ACWI TEMP RANGE to +70�C PIN-PACKAGE 28 CERDIP 28 CERDIP Dice 28 Plastic Dip 28 CERDIP 28 Wide SO 28 Wide SO 28 CERDIP 28 CERDIP Dice 28 Plastic DIP 28 CERDIP 28 Wide SO

Applications

Control Systems Data Logging Systems Aircraft Heads Up Displays Data Acquisition Systems Signal Routing

Devices are available in a lead(Pb)-free/RoHS-compliant package, specify lead-free by adding to the part number when ordering.

ANALOG INPUT (OUTPUTS) +15V V+ CLOCK r01 r02 GND +15V ENABLE IN (MUX ON-OFF CONTROL)

For pricing, delivery, and ordering information, please contact Maxim Direct 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.

(Voltages referenced to V-.) V+...........................................................................................44V GND.......................................................................................25V Digital Inputs VS, VD (Note 1)........................-2V to (V+ or 20mA, whichever occurs first Current, Any Terminal Except or D.................................30mA Continuous Current, or D.................................................20mA Peak Current, or D (pulsed 1ms, 10% duty cycle max).... 40mA *All leads soldered or welded to PCB.

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Storage Temperature ( A and B Suffix)............. +150NC (C Suffix)........................ to +125NC Operating Temperature Range (A Suffix)......... +125NC (B Suffix)........... +85NC (C Suffix).............. to +70NC Continuous Power Dissipation (Package)* 28-Pin Ceramic DIP (derate 16.7mW/NC above +75NC)...1333mW 28-Pin Plastic DIP (derate 14.3mW/NC above +75NC)....1143mW 28-Pin Wide SO (derate 12.5mW/�C above +75�C)...1000mW

(V+ = -15V, VGND = +25NC, unless otherwise indicated.) DG506AA DG507AA MIN TYP (Note 2) (Note 3) MAX DG506AB/C DG507AB/C MIN TYP (Note 2) (Note 3) MAX

SWITCH Analog Signal Range Drain-toSource On-Resistance Greatest Change in Drain-Source On-Resistance Between Channels Source OffLeakage Current VANALOG Sequence each switch on, VAL = 0.8V, VAH = 2.4V, VEN 450 V

(V+ = -15V, VGND = +25NC, unless otherwise indicated.) DG506AA DG507AA MIN TYP (Note 2) (Note -10 0.03 MAX DG506AB/C DG507AB/C MIN TYP (Note 2) (Note -20 0.03 MAX +20

DG506A, sequence each switch on, VAL = 0.8V, VAH = 2.4V, VEN 2.4V DG507A, sequence each switch on, VAL = 0.8V, VAH = 2.4V, VEN = 15V All = 0V

INPUT Address Input Current, InputVoltage High Address Input Current, InputVoltage Low DYNAMIC Switching Time of Multiplexer Break-BeforeMake Interval Enable TurnOn Time Enable TurnOff Time Off-Isolation (Note 5) Source OffCapacitance Drain OffCapacitance SUPPLY Positive Supply Current Negative Supply Current I+ IVEN or 5V, all = 0V VEN or 5V, all 0V mA ttransition tOPEN tON(EN) tOFF(EN) OIRR CS(OFF) CD(OFF) Figure 1 Figure 3 Figure 2 Figure 2 VEN = 500kHz VEN = 0V VEN dB pF IAH -0.002 0.006 VEN = 2.4V VEN 0V FA


Features

Parameters


Manufacturer information

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email support@hqew.net.
Request for Datasheet

  • Part No     :
  • Your Email:
  • Content     :

Other products data
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Post Buying Request
Latest News & Exhibitons
Contact Us

+86-755-83536845

One to One Customer Service

17190417227