HomedatasheetDG528AK/883B

DG528AK/883B Datasheet

Military/Aerospace->Military Standard
Share:
Manufacturer

Description

Features, Applications
SCOPE: CMOS, TTL-COMPATIBLE ANALOG MULTIPLEXER Device Type 01 Generic Number DG528A(x)/883B

Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows: Outline Letter or CDIP2-T18 Case Outline Package Code 18 LEAD CERDIP J18

Absolute Maximum Ratings Voltage Referenced to VV+ to V-.............................................................................................................................. V+ to GND......................................................................................................................... 25V Digital Inputs, VS, VD...............................................................................(-V) or 20mA, whichever occurs first Current, Any terminal except S or D............................................................................... 30mA Continuous Current, S or D............................................................................................. 20mA Peak Current or D (Pulsed 1ms, 10% duty cycle max)........................................... 40mA Lead Temperature (soldering, 10 seconds)........................................................................ +300�C Storage Temperature........................................................................................... to +150�C Continuous Power Dissipation................................................................................... TA=+70�C 18 lead CERDIP(derate 10.5mW/�C above +70�C)....................................................... 842mW Junction Temperature TJ.............................................................................................. +150�C Thermal Resistance, Junction to Case, JC: Case Outline 18 lead CERDIP.......................................................................... 45�C/W Thermal Resistance, Junction to Ambient, JA: Case Outline 18 lead CERDIP.......................................................................... 95�C/W Recommended Operating Conditions. Ambient Operating Range (TA)..................................................................... to +125�C Positive Supply Voltage (V+)........................................................................................... +15V Negative Supply Voltage (V-)........................................................................................... -15V VAL (max).......................................................................................................................... 0.8V VAH (min).......................................................................................................................... 2.4V

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

TABLE 1. ELECTRICAL TESTS CONDITIONS -55 �C <=TA<= VAH=2.4V, VAL=0.8V Unless otherwise specified VAL=0.8V, VAH=2.4V, Sequence each switch VD=10V, VEN=0V

SWITCH Analog-Signal Range Drain-Source ON Resistance Source OFF Leakage Current Source OFF Leakage Current Drain OFF Leakage Current Drain ON Leakage Current NOTE 2 INPUT Input Current/Voltage High

Input Current/Voltage Low SUPPLY Positive Supply Current Negative Supply Current Functional Tests DYNAMIC Transition Time Enable and Write Turn ON Time Enable and Write Turn OFF Time

NOTE 1: Period of reset (RS) pulse must be at least 50�s during or after power ON. NOTE 2: ID(ON) is leakage from driver into "ON" switch.

FIGURE 1: TRANSITION TIME TEST CIRCUIT: See Commercial Data Sheet FIGURE 2: Enable tON/tOFF Test Time Circuit: See Commercial Data Sheet FIGURE 3: Write Turn-On Time Test Circuit: See Commerical Data Sheet

* LATCHING: Maintains previous switch conditions RESET: None (latches cleared) NOTE: Logic "1": VAH2.4V Logic "0": VAL0.8V


Features

Parameters

Download DataSheet PDF View and Download


Manufacturer information

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227