Home datasheet DG529

DG529 Datasheet

Latchable Single 8-/Differential 4-Ch Analog Multiplexers
Share:
Manufacturer

Description

Features, Applications

FEATURES

Low rDS(on): W 44-V Power Supply Rating On-Board Address Latches Break-Before-Make Low Leakage--ID(on): 30 pA

Improved System Accuracy Microporcessor Bus Compatible Easily Interfaced Reduced Crosstalk
APPLICATIONS

Data Acquisition Systems Automatic Test Equipment Avionics and Military Systems Medical Instrumentation

DESCRIPTION

The an 8-channel single-ended analog multiplexer designed to connect one of eight inputs to a common output as determined a 3-bit binary address a 4-channel dual analog multiplexer, is designed to connect one of four differential inputs to a common differential output as determined by its 2-bit binary address (A0, A1) logic. applications. Break-before-make switching action protects against momentary shorting of the input signals. The DG528/529 are built on the improved PLUS-40 CMOS process. A buried layer prevents latchup.

These analog multiplexers have on-chip address and control latches to simplify design in microprocessor based

The on chip TTL-compatible address latches simplify digital interface design and reduce board space in data acquisition systems, process controls, avionics, and ATE.

Top View Top View Document Number: C, 15-Nov-93 Top View www.vishay.com S FaxBack 408-970-5600

Voltage Referenced to V� V+. 44 V GND. 25 V Digital Inputsa, VS, VD. (V�) V to (V+) or 30 mA, whichever occurs first Current (Any Terminal Except S or D). 30 mA Continuous Current, 20 mA Peak Current, or D (Pulsed at 1 ms, 10% Duty Cycle Max). 40 mA Storage Temperature (AK, BK Suffix). to 150_C (CJ, DN Suffix). to 125_C Power Dissipation (Package)b 18-Pin Plastic DIPc. mW 18-Pin CerDIPd. mW 20-Pin PLCCe. 800 mW

Notes: a. Signals on SX, DX or INX exceeding or V� will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads soldered or welded to PC board. c. Derate 6.3 mW/_C above 75_C. d. Derate 1.2 mW/_C above 75_C. e. Derate 10 mW/_C above 75_C.

Test Conditions Unless Otherwise Specified Parameter Analog Switch

Logic Input Current IAH Input Voltage High Logic Input Current Input Voltage Low IAL 15 V VEN 2.4 V Room Hot Room Hot Room Hot mA

Transition Time Break-Before-Make Interval EN and WR Turn-On Time EN and WR Turn-Off Time Charge Injection tTRANS tOPEN tON(EN, WR) tOFF(EN, WR) Q See Figure 5 See Figure 4 See Figures 6 and 7 See Figures 6 and 10 mF

VEN 1 kW Off Isolation Logic Input Capacitance Source Off Capacitance OIRR Cin CS(off) CD(off) = 7 VRMS, = 500 kHz = 1 MHz VEN VS 140 kHz VEN VD 140 kHz DG528 DG529 Room 12 dB

Write Pulse Width , EN Setup Time , EN Hold Time Reset Pulse Width tS tH tRS 5 V, See Figure 3 Full ns


Features

Parameters

Download DataSheet PDF View and Download


Manufacturer information

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227